Grizzly Industrial H6247 - Manual

Page 3 - SAFETY; Safety Instructions for Machinery; NOTICE

-1 - Model H6247 Meat Grinder For Your Own Safety Read Instruction Manual Before Operating This Equipment The purpose of safety symbols is to attract your attention to possible hazard- ous conditions. This manual uses a series of symbols and signal words which are intended to convey the level of imp...

Page 6 - INTRODUCTION; Foreword

Model H6247 Meat Grinder -4 - -4 - INTRODUCTION If you have any comments regarding this manual, please write to us at the following address: Grizzly Industrial, Inc. C/O Technical Documentation P.O. Box 2069 Bellingham, WA 98227-2069 Most importantly, we stand behind our tools. If you have any servi...

Page 7 - SET UP; Unpacking; Inventory

Model H6247 Meat Grinder -5 - -5 - SET UP Figure 1. Model H6247 inventory I B C D G Unpacking Your machine left our warehouse in a carefully packed crate or box. If you dis-cover the machine is damaged after you have signed for delivery, please immedi- ately call Customer Service at (570) 546-9663 f...

Page 9 - Controls

Model H6247 Meat Grinder -7 - Figure 5. Inserting assembly Figure 6. Switch location 9. Twist the feed screw so the vertical slot on the feed screw aligns with the vertical shaft on the inside of the grinder head. 10. Slide the assembly into the grinder head. Use the pin on the side of the barrel as...

Page 10 - Grinding; OPERATIONS

Model H6247 Meat Grinder -8 - Grinding 1. Make sure all meat grinding parts are properly sanitized before beginning. (Refer to the Cleaning section on page 9 ). 2. Install the fine or course cutting plate. 3. Cut all meats into sizes that will easily fit into the hopper throat. 4. Plug in the grinde...

Page 11 - CLEANING & LUBRICATION; Proper Sanitation

Model H6247 Meat Grinder -9 - CLEANING & LUBRICATION Proper Sanitation All surfaces and working parts that have been exposed to meat must be properly sanitized before and after each use. Dishwashers are a good option because they sanitize with heat. If a dishwasher is not available, there are ch...

Page 13 - Parts Breakdown; DESCRIPTION

Model H6247 Meat Grinder -11 - Parts Breakdown DESCRIPTION REF PART # 1 PH6247001 GRINDER MOTOR HOUSING 2 PH6247002 MEAT PUSHER 3 PH6242003 HOPPER 4 PH6247004 BARREL 5 PH6247005 FEED SCREW 6 PH6247006 CUTTING BLADE 7 PH6247007 CUTTING PLATE FINE 8 PH6247008 LOCKING RING 9 PH6247009 CUTTING PLATE COU...

Page 14 - WARRANTY AND RETURNS

Model H6247 Meat Grinder -12 - Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or la...

Page 15 - WARRANTY CARD

Name _________________________________________________________________________Street ________________________________________________________________________City____________________State________Zip_________Phone Number____________E-Mail___________________FAX ____________Model # H6248 Meat Grinder Se...

Page 16 - Send a Grizzly Catalog to a friend:; Place

FOLD ALONG DOTTED LINE GRIZZLY INDUSTRIAL, INC.P.O. BOX 2069BELLINGHAM, WA 98227-2069 TAPE ALONG EDGES--PLEASE DO NOT STAPLE Name________________________________ Street________________________________ City______________State______Zip_______ Send a Grizzly Catalog to a friend: Place Stamp Here

Grizzly Industrial H6247 - Manual

Table of Contents:

Summary

Other Grizzly Industrial Models