Grizzly Industrial H5977 - Manual

Page 2 - NOTICE; safety; safety instructions for pneumatic tools

for your own safety read instruction manual before operating this equipment indicates an imminently hazardous situation which, if not avoided, Will result in death or serious injury. indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. indicates...

Page 4 - basic stapler safety

Model h5977 (Mfg. since 2/07) -3 - operating this stapler can propel objects into the air, causing imme-diate eye damage. to protect your-self, always wear american national standards institute (ansi) approved safety glasses or goggles when oper-ating this equipment. in addition, this stapler discha...

Page 5 - introduction; commentary

Model h5977 (Mfg. since 2/07) -4 - introduction commentary Most importantly, we stand behind our tools. if you have any service questions or parts requests, please call or write us at the location listed below. grizzly industrial, inc. 1203 lycoming Mall Circle Muncy, pa 17756 phone: (570) 546-9663 ...

Page 7 - oiling stapler; operation; loading stapler

Model h5977 (Mfg. since 2/07) -6 - oiling stapler place one or two drops of pneumatic tool oil in the stapler air inlet (as shown in figure 1) before every use. Wipe off any excess oil near the stapler exhaust to avoid dust build-up. operation loading stapler to load your stapler: 1. disconnect the ...

Page 8 - operating stapler

Model h5977 (Mfg. since 2/07) -7 - operating stapler figure 3. operating stapler. if you have not read the safety instruc-tions in this manual, do not operate the stapler. Before you operate your stapler, place one drop of pneumatic tool oil into the quick connect fitting where the stapler connects ...

Page 9 - clearing Jammed staples

Model h5977 (Mfg. since 2/07) -8 - this stapler may accidentally fire if you work on it without disconnecting it from the air supply. always discon-nect air from stapler whenever clear-ing a jammed staple! to clear a jammed staple from the dis-charge area on the model h5977: 1. disconnect the staple...

Page 10 - notes

Page 13 - troubleshooting; problem

Model h5977 (Mfg. since 2/07) -12 - 1. tighten.2. replace. 1. tighten air fitting.2. tighten screws.3. replace o-ring. 1. tighten screws and fit- tings. 2. Clean nose.3. Clean magazine and inspect/repair damage. 4. Check fitting, hose, com- pressor & air pressure. 5. replace piston o-ring. lubri...

Page 14 - Warranty and returns

Model h5977 (Mfg. since 2/07) -13 - grizzly industrial, inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. this warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations ...

Page 15 - Warranty card

name_____________________________________________________________street_____________________________________________________________City____________________state________zip_________phone number____________e-Mail___________________FaX____________model #_______________serial#________________order #___...

Page 16 - place

Fold along dotted line grizzly industrial, inc.p.o. box 2069bellingham, Wa 98227-2069 tape along edges--please do not staple name________________________________ street________________________________ City______________state______zip_______ send a grizzly Catalog to a friend: place stamp here

Grizzly Industrial H5977 - Manual

Table of Contents:

Summary

Other Grizzly Industrial Models