Grizzly Industrial H4380 - Manual

-4- H4380 Buffer Additional Safety Instructions For Buffers 1. ALWAYS WEAR EYE PROTECTION! 2. WEAR AN APPROVED DUST MASKOR RESPIRATOR. Buffing operations produce dust. 3. MAKE SURE BUFFER IS SECUREDFIRMLY TO A BENCH OR STANDBEFORE USE. Any “wobbles” must be corrected by shimming or blocking beforeop...

H4380 Buffer -5- 110V Operation SECTION 2: CIRCUIT REQUIREMENTS If you find it necessary to use an extension cordwith the Model H4380, make sure the cord israted Hard Service (grade S) or better. Refer tothe chart in the standard safety instructions todetermine the minimum gauge for the extensioncor...

-6- H4380 Buffer SECTION 3: INTRODUCTION We are proud to offer the Grizzly Model H4380 8"Buffer. The Model H4380 is part of a growingGrizzly family of fine woodworking machinery.When used according to the guidelines set forth inthis manual, you can expect years of trouble-free,enjoyable operatio...

H4380 Buffer -7- Unpacking Piece Inventory NOTICE A full parts list and breakdown can be foundtoward the end of this manual. For easierassembly, or to identify specific parts,please refer to the detailed illustrations atthe end of the manual. After all the parts have been removed from the carton, yo...

-8- H4380 Buffer SECTION 6: OPERATIONS Keep loose clothingrolled up and out of theway of machinery andkeep hair pulled back. Wear safety glasses dur-ing the entire operationprocess. Failure to com-ply may result in seriouspersonal injury. Using this machine pro-duces sawdust which maycause allergic ...

H4380 Buffer -9- Buffing & Polishing For buffing and polishing, Grizzly offers a broadline of buffing wheels and polishing compounds.Please refer to our current catalog for more infor-mation on these. To buff or polish with the buffer: 1. Make sure the power cord is unplugged andremove the 5 ⁄ 8...

H4380 Buffer -11- Buffing Tips Here are some quick tips for getting the most outof your buffer: • Thoroughly clean all parts that you are plan-ning to buff. Any kind of dirt, oil, rust, paint orother film must be removed either chemicallyor sprayed off with water. Make sure to dry offparts with a ra...

-12- H4380 Buffer SECTION 7: MAINTENANCE Always be aware of the condition of your buffer.Routinely check the condition of the followingitems and repair or replace as necessary: • Loose mounting bolts • Worn switch • Worn or damaged cord • Worn or damaged shaft bearings Miscellaneous Shielded and pre...

-16- H4380 Buffer Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse,negligence, accidents, repairs or alterations or lack of maintena...

Name ____________________________________________________________________________________ Street ____________________________________________________________________________________ City ______________________________________________________________State________Zip_________ Phone Number_____________...