Grizzly Industrial H3034 - Manual
Grizzly Industrial H3034 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – PARTS INVENTORY
- Page 3 – ASSEMBLY INSTRUCTIONS
- Page 4 – H3034 Parts Breakdown and List
LARGE WHEEL NURSERY
PUSH CART
MODEL H3034
INSTRUCTION SHEET
COPYRIGHT © JUNE, 2004 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#CA6393 PRINTED IN CHINA
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
PARTS INVENTORY The Model H3034 was carefully packed when it left our warehouse. If you discover this cart is damaged after you have signed for delivery, please immediately call Customer Service at (570) 546-9663 for advice. Save the containers and all packing materials for possible inspection by th...
When assembling the Model H3034, tighten all nuts and bolts finger tight, then, when the cart is assembled, tighten all nuts and bolts firmly. FENCES, HANDLES, AND LEGS 1. Bolt the fence sides to the inside of the base using the M8-1.25 x 30 hex bolts, flat wash-ers, lock washers, and hex nuts. 2. I...
1 PH3034001 FENCE 2 PH3034002 TAILGATE 3 PH3034003 HANDLE 4 PH3034004 TAILGATE LATCH 5 PH3034005 SUPPORT BAR 6 PH3034006 BASE 7 PH3034007 LEG 9 PH3034009 WHEEL 26 X 2.125 10 PH3034010 AXLE 11 PW13M FLAT WASHER 20MM 12 PH3034012 COTTER PIN 4MM X 42MM 13 PB03M HEX BOLT M8-1.25 X 16 14 PB15M HEX BOLT M...
