Grizzly Industrial H2867 - Manual
Grizzly Industrial H2867 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – NOTICE; Safety Instructions For Power Tools; SAFETY
- Page 5 – INTRODUCTION; Commentary
- Page 6 – OPERATION; Adjustments; Test Run
- Page 7 – Operation
- Page 8 – MAINTENANCE; Changing Brushes
- Page 9 – NOTES
- Page 10 – WARRANTY AND RETURNS
- Page 11 – WARRANTY CARD
- Page 12 – Place
COPYRIGHT © NOVEMBER, 2001 BY GRIZZLY INDUSTRIAL, INC.
1821 VALENCIA ST., BELLINGHAM, WA 98227
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
PRINTED IN CHINA
ELECTRIC SHEAR
MODEL H2867
INSTRUCTION MANUAL
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
For Your Own Safety Read Instruction Manual Before Operating This Equipment Indicates an imminently hazardous situation which, ifnot avoided, WILL result in death or serious injury. Indicates a potentially hazardous situation which, ifnot avoided, COULD result in death or serious injury. Indicates a...
H2867 Electric Shear -3 - INTRODUCTION Commentary Most importantly, we stand behind our tools. If you have any service questions or parts requests, please call or write us at the location listed below. Grizzly Industrial, Inc. 1203 Lycoming Mall Circle Muncy, PA 17756 Phone: (570) 546-9663 Fax: (800...
H2867 Electric Shear -4 - OPERATION Adjustments Your Model H2867 includes a set of three thickness shims: 0.005", 0.008" and 0.013". These shims are used to set the gap size between the side of the shear jaw and the moving cutter. Depending on the thickness of the material you intend to ...
