Grizzly Industrial G8183 - Manual
Grizzly Industrial G8183 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Grinder Installation; The hole may
- Page 3 – parts; this Angle Grinder
- Page 4 – n4RUSTED0ROVENANDA'REAT6ALUE
MODEL G8183
4
1
⁄
2
" Angle Grinder Stand
INSTRUCTION SHEET
To reduce the risk of property damage
or serious personal injury when using
this grinder stand, take the following
precautions:
•
Never attempt to start or run a grinder
on this grinder stand without using the
grinder blade guard.
•
Never use this grinder stand unless it is
fastened to a metal workbench.
•
Verify that the grinder is securely
mounted before every use.
•
All mounting studs must be secured
against the grinder. If any mounting
stud is loose, do not use the grinder
stand until the correct grinder can be
mounted. Otherwise the grinder could
work loose causing personal injury.
•
Always unplug the grinder before
loosening and repositioning the grinder
blade guard, or when making any other
adjustments or checks.
•
Never modify this grinder stand.
•
Never allow children to play with or
near the grinder stand.
•
Often inspect all stand bolts, framework,
the spring, and connections for
looseness, cracks, or other damage.
•
Never use this grinder at a location
where grinding sparks may ignite
flammable materials.
•
Always wear safety goggles, respirator,
and hearing protection when using this
grinder stand.
•
Never hold a workpiece by hand when
using this grinder stand. Always secure
the workpiece with the vise.
Inventory
Box 1: (Figure 1)
Qty
A. Lever Assembly .......................................... 1
B. Base ........................................................... 1
C. Grinder Mount Assembly ............................ 1
D. Angle Jaw Assembly .................................. 1
E. Cam Jaw .................................................... 1
F. Spark Shield Assembly .............................. 1
G. Lever ........................................................... 1
Figure 1. G8183 Inventory.
A
B
C
F
D
E
G
Specifications
Model: G8183 Angle Grinder Stand
•
Maximum Grinder Size: 4
1
⁄
2
" Dia. Wheel
•
Size: (L x W x H): 10" x 10" x 15"
•
Net Weight: 4.7 lbs.
Base Assembly
1. Assemble the grinder stand in the locations
shown in
Figure 2.
Figure 2. G8183 assembly locations.
CopyrIGHt © SEptEMBEr, 2008 By GrIzzLy INDuStrIAL, INC.
WARNING: NO pORTION OF THIS MANUAL MAy BE REpRODUCED IN ANy SHApE
OR FORM WITHOUT THE WRITTEN AppROVAL OF GRIzzLy INDUSTRIAL, INC.
#Cr10776 prINtED IN CHINA
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Figure 5. G8183 grinder mounting locations. 3. Finger tighten both stabilizer bolts against the grinder headstock casting ( Figure 5). Figure 6. G8183 grinder alignment. 2. remove the lever on the eccentric, loosen the t-nut bolt so it is just finger tight, then rotate the cam so the threaded hole i...
, '!&+ . . * + '& ) && &% &,!&+ & &(!&) &* '% (!&- '' ( &' ') &+ REF PART # DESCRIPTION 1 P8183001 GRINDER MOUNT ASSEMBLY 2 PSB13M CAP SCREW M8-1.25 X 30 3 PB18M HEX BOLT M6-1 X 15 4 P8183004 SPARK SHIELD 5 PB116M HEX BOLT M10-1.5 X 45 6 PN02M ...
"UY$IRECTAND3AVEWITH'RIZZLY ® n4RUSTED0ROVENANDA'REAT6ALUE /2 s 3%#52%/2$%2).' s /2$%233()00%$7)4().(/523 s %-!),2%30/.3%7)4()./.%(/52 6ISIT/UR7EBSITE4ODAY!ND$ISCOVER 7HY'RIZZLY ® )S4HE)NDUSTRY,EADER #ALL4ODAY&OR! &2%% &ULL#OLOR#ATALOG
