Grizzly Industrial G6772 - Manual

Page 2 - NOTICE; Safety Instructions For Pneumatic Tools; SAFETY

For Your Own Safety Read Instruction Manual Before Operating This Equipment Indicates an imminently hazardous situation which, ifnot avoided, WILL result in death or serious injury. Indicates a potentially hazardous situation which, ifnot avoided, COULD result in death or serious injury. Indicates a...

Page 4 - Basic Stapler Safety

G6044/G6772 16 Gauge Stapler Kit -3 - Operating this stapler can propelobjects into the air, causing immedi-ate eye damage. To protect yourself,always wear American NationalStandards Institute (ANSI) approvedsafety glasses or goggles when oper-ating this equipment. In addition, thisstapler discharge...

Page 5 - INTRODUCTION; Commentary

G6044/G6772 16 Gauge Stapler Kit -4 - INTRODUCTION Commentary Most important, we stand behind our tools. If you have any service questions or parts requests, please call or write us at the location listed below. Grizzly Industrial, Inc. 1203 Lycoming Mall Circle Pennsdale, PA 17756 Phone: (570) 546-...

Page 7 - OPERATION; Loading Stapler

G6044/G6772 16 Gauge Stapler Kit -6 - OPERATION Loading Stapler Single/Bump Fire Mode To load your stapler: 1. Disconnect the air supply from thestapler! 2. Pull the magazine pusher (shown in Figure 1 ) all the way to the back of the magazine until is snaps in place. The Model G6044/G6772 is equippe...

Page 8 - Operating Stapler

G6044/G6772 16 Gauge Stapler Kit -7 - Operating Stapler If you have not read the safety instruc-tions in this manual, do not operate thestapler. Before the first operation, and periodically after that, place one drop of the included oil into the quick connect fitting where the sta- pler connects to ...

Page 9 - Clearing Jammed Staples

G6044/G6772 16 Gauge Stapler Kit -8 - Figure 5. Removing guide cover. Quick Release Latch Driver Guide Cover Always disconnect air from staplerwhenever clearing a jammed staple! Clearing Jammed Staples The most frequent situation that may occur with any type of stapler is a staple jam. A jammed stap...

Page 12 - MAINTENANCE NOTES

G6044/G6772 16 Gauge Stapler Kit -11 - MAINTENANCE NOTES

Page 17 - TROUBLESHOOTING

TROUBLESHOOTING Air leaking at trigger valvearea. Air leaking between hous-ing and hose. Air leaking between hous-ing and cap assembly. Tool skips staples while dis-charging. Tool runs slowly or has aloss of power. Fasteners frequently jamthe stapler. Stapler does not fire. 1. O-rings must be replac...

Page 18 - WARRANTY AND RETURNS

G6044/G6772 16 Gauge Stapler Kit -17 - Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alteratio...

Page 19 - WARRANTY CARD

Name __________________________________________________________ Street __________________________________________________________ City ____________________ State ________ Zip _________ Phone Number ____________ E-Mail ___________________ FAX ____________ Model # ______________Serial#________________...

Page 20 - Place

FOLD ALONG DOTTED LINE GRIZZLY INDUSTRIAL, INC.P.O. BOX 2069BELLINGHAM, WA 98227-2069 TAPE ALONG EDGES--PLEASE DO NOT STAPLE Name________________________________ Street________________________________ City______________State______Zip_______ Send a Grizzly Catalog to a friend: Place Stamp Here

Grizzly Industrial G6772 - Manual

Table of Contents:

Summary

Other Grizzly Industrial Models