Grizzly Industrial G6047 - Manual

Page 2 - NOTICE; Safety Instructions For Power Tools; SAFETY

For Your Own Safety Read Instruction Manual Before Operating This Equipment Indicates an imminently hazardous situation which, ifnot avoided, WILL result in death or serious injury. Indicates a potentially hazardous situation which, ifnot avoided, COULD result in death or serious injury. Indicates a...

Page 4 - Basic Nailer Safety

G6045/G6046/G6047 18 Gauge Brad Nailer -3 - Operating this nailer can propelobjects into the air, causing immedi-ate eye damage. To protect yourself,always wear American NationalStandards Institute (ANSI) approvedsafety glasses or goggles when oper-ating this equipment. In addition, thisnailer disch...

Page 5 - INTRODUCTION; Commentary

G6045/G6046/G6047 18 Gauge Brad Nailer -4 - INTRODUCTION Commentary Most importantly, we stand behind our tools. If you have any service questions or parts requests, please call or write us at the location listed below. Grizzly Industrial, Inc. 1203 Lycoming Mall Circle Pennsdale, PA 17756 Phone: (5...

Page 7 - OPERATION; Loading Nailer

G6045/G6046/G6047 18 Gauge Brad Nailer -6 - OPERATION Loading Nailer Operating Nailer To load your nailer: 1. Disconnect the air supply from thenailer! 2. Flip the magazine latch in the direc- tion shown in Figure 1 . If you have not read the safety instruc-tions in this manual, do not operate thena...

Page 9 - Clearing Jammed Nails

Always disconnect air from nailerwhenever clearing a jammed nail! G6045/G6046/G6047 18 Gauge Brad Nailer -8 - To clear a jammed nail from the discharge area on the Model G6046: 1. Disconnect the nailer from the airsupply! Remove all brad nails from the magazine. 2. Loosen the 2 cap screws that secur...

Page 17 - TROUBLESHOOTING; PROBLEM

TROUBLESHOOTING Air leaking at trigger valvearea. Air leaking between hous-ing and hose. Air leaking between hous-ing and cap assembly. Tool skips nails while dis-charging. Tool runs slowly or has aloss of power. Fasteners frequently jamthe nailer. Nailer does not fire. 1. O-rings must be replaced &...

Page 18 - WARRANTY AND RETURNS

G6045/G6046/G6047 18 Gauge Brad Nailer -17 - Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alt...

Page 19 - WARRANTY CARD

Name __________________________________________________________ Street __________________________________________________________ City ____________________ State ________ Zip _________ Phone Number ____________ E-Mail ___________________ FAX ____________ Model # ___________________________ Order # _...

Page 20 - Place

FOLD ALONG DOTTED LINE GRIZZLY INDUSTRIAL, INC.P.O. BOX 2069BELLINGHAM, WA 98227-2069 TAPE ALONG EDGES--PLEASE DO NOT STAPLE Name________________________________ Street________________________________ City______________State______Zip_______ Send a Grizzly Catalog to a friend: Place Stamp Here

Grizzly Industrial G6047 - Manual

Table of Contents:

Summary

Other Grizzly Industrial Models