Grizzly Industrial G6042 - Manual

Page 2 - NOTICE; Safety Instructions For Power Tools; SAFETY

For Your Own Safety Read Instruction Manual Before Operating This Equipment Indicates an imminently hazardous situation which, ifnot avoided, WILL result in death or serious injury. Indicates a potentially hazardous situation which, ifnot avoided, COULD result in death or serious injury. Indicates a...

Page 4 - Basic Stapler Safety

G6042/G6043 18 Gauge Stapler Kit -3 - Operating this stapler can propelobjects into the air, causing immedi-ate eye damage. To protect yourself,always wear American NationalStandards Institute (ANSI) approvedsafety glasses or goggles when oper-ating this equipment. In addition, thisstapler discharge...

Page 5 - INTRODUCTION; Commentary

G6042/G6043 18 Gauge Stapler Kit -4 - INTRODUCTION Commentary Most importantly, we stand behind our tools. If you have any service questions or parts requests, please call or write us at the location listed below. Grizzly Industrial, Inc. 1203 Lycoming Mall Circle Pennsdale, PA 17756 Phone: (570) 54...

Page 7 - OPERATION; Loading Stapler

G6042/G6043 18 Gauge Stapler Kit -6 - OPERATION Loading Stapler To load your stapler: 1. Disconnect the air supply from thestapler! 2. Push the magazine latch in the direc- tion shown in Figure 1 . 3. Pull back the magazine cover until it stops. Figure 1. Releasing magazine latch. Figure 2. Loading ...

Page 8 - Operating Stapler

G6042/G6043 18 Gauge Stapler Kit -7 - Operating Stapler If you have not read the safety instruc-tions in this manual, do not operate thestapler. Before you operate your stapler, place one drop of the included oil into the quick con- nect fitting where the stapler connects to the air supply. Fire the...

Page 9 - Clearing Jammed Staples

Always disconnect air from staplerwhenever clearing a jammed staple! G6042/G6043 18 Gauge Stapler Kit -8 - Clearing Jammed Staples The most frequent situation with any type of stapler is a staple jam. A jammed staple must be cleared before using the stapler again. The two places where a staple can g...

Page 12 - MAINTENANCE NOTES

G6042/G6043 18 Gauge Stapler Kit -11 - MAINTENANCE NOTES

Page 17 - TROUBLESHOOTING

TROUBLESHOOTING Air leaking at trigger valvearea. Air leaking between hous-ing and hose. Air leaking between hous-ing and cap assembly. Tool skips staples while dis-charging. Tool runs slowly or has aloss of power. Fasteners frequently jamthe stapler. Stapler does not fire. 1. O-rings must be replac...

Page 18 - WARRANTY AND RETURNS

G6042/G6043 18 Gauge Stapler Kit -17 - Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alteratio...

Page 19 - WARRANTY CARD

Name __________________________________________________________ Street __________________________________________________________ City ____________________ State ________ Zip _________ Phone Number ____________ E-Mail ___________________ FAX ____________ Model # ___________________________ Order # _...

Page 20 - Place

FOLD ALONG DOTTED LINE GRIZZLY INDUSTRIAL, INC.P.O. BOX 2069BELLINGHAM, WA 98227-2069 TAPE ALONG EDGES--PLEASE DO NOT STAPLE Name________________________________ Street________________________________ City______________State______Zip_______ Send a Grizzly Catalog to a friend: Place Stamp Here

Grizzly Industrial G6042 - Manual

Table of Contents:

Summary

Other Grizzly Industrial Models