Grizzly Industrial G5939 - Manual
Grizzly Industrial G5939 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
RAZOR SHARP EDGEMAKING SYSTEM
RECOMMENDED SPEED 3000 - 3600 RPM
Page Four
CAUTION!:
ALWAYS USE
ANSI COMPLIANT EYE
PROTECTION
and
NEVER! - TURN
THE CUTTING EDGE INTO EITHER
WHEEL
.
YES
NO!
IF YOU HAVE ANY PROBLEMS OR QUESTIONS ABOUT THIS
PRODUCT, PLEASE CONTACT THE MANUFACTURER,
TOLL FREE: 1-866-419-4879, FAX: 1-707-459-1541
E-MAIL: [email protected]
MANUFACTURED IN THE USA AND
FULLY WARRANTED
BY:
Razor Sharp Edgemaking System
26195 Otter DR
Willits, CA 95490-8046, USA
Web: www.sharpeningwheels.com
THE WARRANTY ON THIS PRODUCT IS COMPLETELY
UNCONDITIONAL AND FREE OF “
RED TAPE
”!
Should you find a manufacturing defect with one of our wheels
we will replace it free of charge or refund your purchase price,
including shipping.
CALL TOLL FREE: 1-866-419-4879
or 1-877-725-2197
This wheel is a
replacement wheel
(either gritted or slotted) for the eight
inch Razor Sharp Edgemaking System. It will put a polished razor sharp
edge on your knives and tools in just seconds.
Gritted Wheel is Grizzly Part #G5938
Slotted Wheel is Grizzly Part #G5939
THE WHEEL IN THIS PACKAGE IS EIGHT INCHES BY THREE-
QUARTERS OF AN INCH WITH A FIVE EIGHTHS-INCH ARBOR HOLE.
The installed bushing converts it to a one-half inch arbor hole. Simply
remove the bushing for use on a five-eighths inch arbor.
This eight inch wheel is intended for use on a six inch buffer or bench
grinder, turning at least 3,000 RPMs. You will sharpen many knives be-
fore needing to re-surface the grit wheel. The slotted wheel needs to be
“dressed” occasionally with 60 grit sandpaper.
Brought to you by:
RECOMMENDED SPEED 3000 - 3600 RPM
Page One
Phone: (800) 523-4777
Fax: (800) 438-5901
www.grizzly.com
8x75x625GWWB or 8x75x625SWWB
07/12/2010
PLEASE READ THE INSTRUCTIONS!
Including the safety instructions on page four.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
