Grizzly Industrial G5354 - Manual

Model G5354 Airbrush -5 - SECTION 2: INTRODUCTION We are proud to offer the Grizzly Model G5354 Airbrush. This model is part of a growing Grizzly family of fine tools. When used according to the guidelines set forth in this manual, you can expect years of trouble-free, enjoyable operation, and proof...

Model G5354 Airbrush -6 - Customer Service #: (570) 546-9663 • To Order Call: (800) 523-4777 • Fax #: (800) 438-5901 TOOL DATA SHEET Model G5354 Airbrush MODEL G5354 MIX TYPE External TYPE OF FEED Siphon (Bottom) SPRAY PATTERN Pencil Line to 2" TRIGGER ACTION Dual INLET AIR PRESSURE 15-50 PSI BO...

Model G5354 Airbrush -7 - SECTION 3: SETUP Your airbrush left our warehouse in a care-fully packed box. If you discover the air-brush is damaged after you have signed for delivery, please immediately call Customer Service at (570) 546-9663 for advice. Save the containers and all packing materi-als f...

Model G5354 Airbrush -8 - Needle Chuck: Loosens the needle for air spray adjustment. Needle: The position of the needle relative to the spray tip controls the shape and size of the spray pattern. Unlock the needle then slide it in or out to adjust the spray. Trigger: Operates the flow of paint throu...

Model G5354 Airbrush -9 - SECTION 4: OPERATIONS The paint you use with this brush should be thinned to the consistency of 2% milk. Strain paint with a coffee filter when pour-ing it into the jar. Keep in mind that paint dries quickly inside the airbrush. If you plan to stop spraying for a few minute...

Model G5354 Airbrush -10 - Figure 7. G6261 Campbell Hausfeld™ water filter. G6261— Campbell Hausfeld™ Water Filter Remove damaging water vapor before it reaches your pneumatic tools. This highly effective, five micron filter features a see- through bowl and easy in-line connections. 150 PSI maximum ...

Model G5354 Airbrush -11 - SECTION 6: MAINTENANCE Cleaning Proper cleaning is the best way to ensure trouble free performance from your air-brush. If your airbrush is not thoroughly cleaned, damage and poor spraying will result. Problems caused by improper clean-ing will not be covered by the warran...

Model G5354 Airbrush -12 - Troubleshooting Symptom Possible Cause Solution Excessive over-spray. 1. Spray pattern adjusted incor- rectly for your application. 2. Air press too high.3. Airbrush is too far from sur- face. 4. Spraying too fast. 1. Adjust the spray regulator. 2. Reduce air pressure.3. K...

Model G5354 Airbrush -14 - Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack o...

WARRANTY CARD Name _________________________________________________________________Street _________________________________________________________________City _______________________ State _________________________ Zip _________Phone # ____________________ Email ________________________ Invoice # ...

FOLD ALONG DOTTED LINE GRIZZLY INDUSTRIAL, INC.P.O. BOX 2069BELLINGHAM, WA 98227-2069 TAPE ALONG EDGES--PLEASE DO NOT STAPLE Name________________________________ Street________________________________ City______________State______Zip_______ Send a Grizzly Catalog to a friend: Place Stamp Here