Grizzly Industrial G1030 - Manual

G1030 Dust Collector -7- Grizzly Industrial, Inc. is proud to offer the ModelG1030 Dust Collector. These dust collectors area part of Grizzly’s growing family of fine machin-ery. When used according to the guidelines setforth in this manual, you can expect years of trou-ble-free, enjoyable operation...

-8- G1030 Dust Collector Unpacking The Model G1030 Dust Collector is shipped fromthe manufacturer in a carefully packed carton. Ifyou discover the machine is damaged afteryou’ve signed for delivery, please call Customer Service immediately for advice. Save the containers and all packing materials fo...

G1030 Dust Collector -9- Site Considerations When placing the G1030 Dust Collector in yourshop, two major considerations should beaddressed: working clearances and electricalaccess and loading. 1. Working Clearances: Be sure to allow your- self sufficient room to safely operate yourmachines in any f...

-10- G1030 Dust Collector SECTION 4: ASSEMBLY Beginning Assembly Assembly of the G1030 is straightforward andcan be accomplished quite easily. We have orga-nized the assembly process into logical steps.Please follow them in sequence. You will find that some pre-assembly has beendone at the factory. ...

G1030 Dust Collector -11- Figure 3. Mounting collector to base. Figure 4. Mounting outlet to collector body. Collector Body The collector body includes the fan assembly,switch, motor and power cord which are pre-assembled at the factory. Set the collector bodyon top of the base plate so the intake p...

-12- G1030 Dust Collector Collectors The left and right collectors attach to each side ofthe outlet flange and are later supported by thesupport bracket assembly. The inside of the col-lectors are funnel shaped and force the airaround in a cyclone motion. Make sure that theinside taper (funnel) is f...

G1030 Dust Collector -13- Figure 8. Securing the bag to the collector Collection/Filter Bags bolt through one side of the clamp, then the locknut, then thread the bolt through the other clamp. Figure 9 Hook the loops of the two upper filter bags overthe upper support bracket. Figure 10. There are tw...

-14- G1030 Dust Collector SECTION 6: OPERATIONS Please review the safety rules if you are not sureabout the risks associated with operating thismachine. Turn on the power supply at the mainpanel if not already on. Press the ON switch andbe ready to switch OFF just in case there is aproblem. The dust...

-16- G1030 Dust Collector System Grounding Since plastic hose is abundant, relatively inex-pensive, easily assembled, and airtight, it is avery popular material for conveying dust fromwoodworking machines to the dust collector. Werecommend using flexible hose (flex-hose) toconnect the woodworking ma...

G1030 Dust Collector -17- SECTION 7: MAINTENANCE Lubrication Impeller Tightening Periodic maintenance will ensure safe operation,long dust collector life, and low overall cost ofoperation. General

G1030 Dust Collector -19- Design Type ...................................................................................................... Floor Model Specifications: Intake Hole Size ..........................................................................................................6"In...

-22- G1030 Dust Collector Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse,negligence, accidents, repairs or alterations or lack of ...

10. Which benchtop tools do you own? Check all that apply. ___1" x 42" Belt Sander ___6" - 8" Grinder ___5" - 8" Drill Press ___Mini Lathe ___8" Table Saw ___10" - 12" Thickness Planer ___8" - 10" Bandsaw ___Scroll Saw ___Disc/Belt Sander ___Spindle/Belt S...