Greenheck FSDGB-211 - Manual
Greenheck FSDGB-211 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Pressure Drop Data; AMCA Test Figures
- Page 3 – AMCA 5.2 Pressure Drop
- Page 4 – AMCA 5.3 Pressure Drop
- Page 5 – AMCA 5.5 Pressure Drop
- Page 6 – GREENHECK; Specifications
Model FSDGB-211
Steel 3V Blades
Qualified to Standard GB 15931-1995
Combination
FIRE SMOKE DAMPERS
* W & H dimensions furnished approximately 6mm (1/4 in.)
undersize.
(Add sleeve thickness for overall sleeved damper dimension)
Right hand drive is shown. Left hand drive is available upon request.
Application
Model FSDGB-211 is a combination fire smoke damper with 3V style
blades. The FSDGB-211 has been qualified to Standard
GB 15931-1995 for operation and closure in emergency fire smoke
situations. Model FSDGB-211 may be installed vertically (with
blades running horizontal) or horizontally and is rated for airflow and
leakage in either direction.
Ratings
Standard GB 15931-1995
Velocity:
10 m/s (2000 fpm)
Pressure:
1kPa (4 in. wg)
Standard Construction
Frame:
127mm x 25.4 mm (5 in. x 1 in.)
1.24mm galvanized steel hat
channel with reinforced corners. A
low profile head and sill are used on
sizes less than 432mm (17 in.) high
to maximize free area and
performance.
Blades:
1.24mm (16 ga.) galvanized steel,
reinforced with 3 longitudinal
structurally designed vee’s.
Seals:
Extruded silicone rubber blade
seals. Flexible stainless steel jamb
seals.
Linkage:
Concealed in jamb.
Axles:
12.7 mm (
1
⁄
2
in.) dia. plated steel.
Bearings:
Bronze sleeve type.
Fusible Link:
280° C
Size Limitations
Minimum Size:
204mm W x 152mm H
(8 in. W x 6 in. H)
Maximum Size:
Single Section:
813mm W x 914mm H
(32 in. W x 36 in. H)
Multiple Section:
1626mm W x 914mm H
(64 in. W x 36 in. H)
Optional Features
• Stainless steel bearings
• OCI (Open closed indication switches)
• Retaining Angles
• Transitions (C, O, R)
• Sealed transitions and sleeves
• Sleeve with integral flange on both sides
R
Greenheck Kunshan Co. Ltd. and Greenheck Fan
Corporation certifies that the model FSDGB-211
shown herein is licensed to bear the AMCA Seal. The
ratings shown are based on tests and procedures
performed in accordance with AMCA Publication
511 and comply with the requirements of the AMCA
Certified Ratings Programs. The AMCA Certified
Ratings Seal applies to air performance ratings only.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Pressure Drop Data FSDGB-211 This pressure drop testing was conducted in accordance with AMCA Standard 500-D using the three configurations shown. All data has been corrected to represent standard air at a density of 1.201 kg/m3. Actual pressure drop found in any HVAC system is a combination of many...
AMCA 5.2 Pressure Drop FSDGB-211 5D 6D 5D D = 4 (W) (H) 3.14 Figure 5.3 Figure 5.2 Figure 5.5 R Greenheck Kunshan Co. Ltd. and Greenheck Fan Corporation certifies that the model FSDGB-211 shown herein is licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in...
R Greenheck Kunshan Co. Ltd. and Greenheck Fan Corporation certifies that the model FSDGB-211 shown herein is licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 511 and comply with the requirements of the AMCA Certified R...
