Graco TI15596a - Manual

Graco TI15596a

Graco TI15596a – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
22 Page 22
23 Page 23
24 Page 24
25 Page 25
26 Page 26
27 Page 27
28 Page 28
29 Page 29
30 Page 30
Page: / 30

Table of Contents:

  • Page 2 – Contents
  • Page 4 – Warnings; WARNING
  • Page 6 – Installation; Grounding
  • Page 7 – Stand Mount; Wall Mount; Plumbing
  • Page 8 – Accessories; Air Line
  • Page 11 – Operation; Pressure Relief Procedure; Shutdown
  • Page 12 – Maintenance; Mix Tank Volume
  • Page 13 – Changing the TSL
  • Page 15 – Troubleshooting
  • Page 16 – Repair; Disassembly; Reassembly; Shield Disassembly
  • Page 18 – Parts; Common Parts
  • Page 22 – Dimensions
  • Page 23 – Motor Mounting Hole Diagrams
  • Page 26 – Technical Data
  • Page 27 – Performance Charts
  • Page 30 – Graco Standard Warranty; Graco Information
Loading the manual

Instructions - Parts List

High-Flo

®

4-Ball

Pumps

3A0538F

EN

Air-powered pumps for low pressure, high volume circulation of finishing materials.
Do not use for flushing or purging lines with caustics, acids, abrasive line strippers, and
other similar fluids. For professional use only.

See page 3 for model information, including
maximum working pressure.

Important Safety Instructions

Read all warnings and instructions in this
manual. Save these instructions.

TI15596a

TI15605a

High-Flo Pump with
4000cc 4-Ball Lower

High-Flo Pump with
2000cc 4-Ball Lower

II 2 G

c IIB T3

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Contents

2 3A0538F Contents Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Related Manuals . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Installation . . . . . . . . . . . . . . . . . . . . ...

Page 4 - Warnings; WARNING

Warnings 4 3A0538F Warnings The following warnings are for the setup, use, grounding, maintenance, and repair of this equipment. The exclama-tion point symbol alerts you to a general warning and the hazard symbols refer to procedure-specific risks. When these symbols appear in the body of this manua...

Page 6 - Installation; Grounding

Installation 6 3A0538F Installation Grounding Pump: use a ground wire and clamp. See F IG . 1. Remove the green ground screw (Z) from the bottom of the air motor. Insert the screw through the loop on the end of the ground wire (Y) and reattach the screw to the air motor. Connect the ground clamp to ...

Other Graco Models

All Graco Other