Graco MPFHVLP - Manual
Graco MPFHVLP – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – MPFHVLP SPRAY GUN; Setup; Spraying; WARNING; WARNING; CAUTION
- Page 4 – Cleaning and Maintenance; Cleaning Gun; Technical Data; Spray Gun
- Page 5 – Problem
- Page 6 – Parts
SHARPE MANUFACTURING COMPANY • P.O. BOX 1441, MINNEAPOLIS, MN 55440-1441
1-800-742-7731, www.sharpe1.com
309990C, 4/2006
THE SPRAY GUN PEOPLE
FOR PRODUCT INFORMATION CALL:
1-800-742-7731
MPFHVLP
Mini Pressure Feed Spray Gun
Maximum Air and Fluid Inlet Pressure: 50 psi (345 kPa, 3.4 bar)
Maximum HVLP Compliant Air Pressure: 40 psi (276 kPa, 2.8 bar)
Part No. 7045 Spray Gun
For pressure feed spraying of automotive colors and clears.
Important Safety Instructions
Read all warnings and instructions in this manual.
Save these instructions.
II 2 G
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
3 309990C MPFHVLP SPRAY GUN Setup • Set shop air pressure regulator (not supplied) according to paint manufacturer’s recommendation. See maximum air and fluid pressures on cover. • Make sure no air restrictions, such as low-volume cheater-valves, obstruct the air flow. If an air adjusting valve is d...
4 309990C MPFHVLP SPRAY GUN Cleaning and Maintenance Volatile Organic Compounds (VOC) Regulation In certain states, spraying solvents that release VOC’s into the atmosphere when cleaning a spray gun is prohibited. To comply with these air quality laws you must use a cleaning method that prevents the...
5 309990C MPFHVLP SPRAY GUN Troubleshooting WARNING Follow Pressure Relief Procedure , page 3, before troubleshooting or servicing. Read warnings, page 2. Problem Cause Solution Normal pattern No action necessary Dirty or damaged air cap or fluid nozzle. Rotate air cap 180°. If pattern follows air c...
