Graco Mark X 240 Volt- User Manual
Graco Mark X 240 Volt– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Mark X
240 VOLT
Electric Airless Texture Sprayer
©2008-2013 Graco Inc. 343126B
About 240 Volts
• The Mark X 240 VOLT operates on 220-240
volt, single phase power (L6-30 plug).
• 220-240 volt power is available at
most construction sites or with a
typical generator.
• Demand for 240 volts on a jobsite is less,
so it is easier to find an open receptacle.
No fighting other trades for power.
• 240 volts gives the extra power needed to
achieve gas sprayer performance, in an
electric unit.
• Contractors have discovered that 240 Volts
is an advantage, not an obstacle!
• 220-240 volt power is usually provided one
of two ways:
– 4 wire
– 3 wire
• Mark X is built with a 3-wire plug to be
connected to a 3 wire receptacle
• Mark X can be connected to 4 wire
receptacle by using an adapter pigtail
assembled by an electrician as follows:
Y - Red Hot
X - Black Hot
G - Green Ground
W - White Neutral (not used)
G
Y
W
X
L1 Hot
L2 Hot
Neutral
Ground
3-Pole, 4-Wire Grounding: 240V
Black
White
Red
Green/Bare
EQUIP.
GROUND
L14-30R
G
120V
120V
240V
Look for markings on device:
• X and Y are Hot
• G is Ground
• W is Neutral
G
Y
X
L1 Hot
L2 Hot
Ground
2-Pole, 3-Wire Grounding: 240V
Black
Red
Green/Bare
EQUIP.
GROUND
G
Look for markings on device:
• X and Y are Hot
• G is Ground
L6-30R
240V
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
