Graco M18xxx - Manual
Graco M18xxx – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Contents
- Page 3 – Warnings; WARNING
- Page 5 – Models
- Page 6 – Component Identification
- Page 7 – Grounding; Accessories; Bleed-type master air valve
- Page 8 – Troubleshooting
- Page 9 – Repair; Pressure Relief Procedure; Repair Air Valve; Replace Complete Air Valve
- Page 10 – Replace Seals or Rebuild Air Valve
- Page 13 – Replace Pilot Valves; Disconnect the Air Motor
- Page 14 – Disassemble the Air Motor; Reassemble the Air Motor
- Page 16 – Parts
- Page 17 – Air Motor Parts — All Models
- Page 19 – Air Valve Parts
- Page 21 – Kits and Accessories
- Page 22 – Dimensions
- Page 23 – Mounting Hole Diagrams
- Page 25 – Technical Data
- Page 26 – Graco Standard Warranty; Graco Information
Instructions/Parts
NXT
®
Air Motor
312796R
EN
For use with high performance finishing and coating pumps in hazardous or
non-hazardous locations. For professional use only.
Models M02xxx, M04xxx, M07xxx, M12xxx, M18xxx, and M34xxx
100 psi (0.7 MPA, 7.0 bar) Maximum Working Pressure
See page 3 for model information.
Important Safety Instructions
Read all warnings and instructions in this
manual. For complete warnings and
instructions see your pump or package
manual. Hazard symbols refer to specific
procedure risks. Save all instructions.
ti11838a
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Related Manuals 2 312796R Contents Related Manuals . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Component Identification . . . . . . ...
Warnings 312796R 3 Warnings The following warnings are for the setup, use, grounding, maintenance, and repair of this equipment. The exclama-tion point symbol alerts you to a general warning and the hazard symbol refers to procedure-specific risk. Refer back to these warnings. Additional, product-sp...
Models 312796R 5 Models Check your motor’s identification plate (ID) for the 6-digit part number of your motor. Use the following matrix to define the construction of your motor. For example, motor part number M04LT0 represents an air motor (M) , with 400 cc displacement, a 3.5 in. piston diameter a...
