Graco L10XCS - Manual
Graco L10XCS – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Contents; WARNING
- Page 4 – Operation; Pressure Relief Procedure
- Page 5 – Repair; Disconnect the Lower; Intake Valve; Throat Packings
- Page 6 – Reconnect the Lower; Check Valve Adjustment
- Page 8 – Parts
- Page 10 – Outlet Housing Mounting Hole Layout
- Page 11 – Dimensions
- Page 12 – Graco Standard Warranty
Instructions - Parts List
Carbon Steel
1000cc Lower
Designed for low to medium pressure, medium volume circulation of finishing materials.
For professional use only.
Not approved to European explosive atmosphere requirements.
1180 psi (8.1 MPa, 81 bar) Maximum Working Pressure
Model 253597, Series A
UHMWPE/Leather Packings
Model L10XCS, Series A
UHMWPE/PTFE Packings
Patent Pending
Important Safety Instructions
Read all warnings and instructions in this manual and in
your 1000cc Dura-Flo Pump manual 311833. Save all
instructions.
TI8337a
311717E
ENG
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Warnings 2 311717E Contents Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Pressure Relief Procedure . . . . . . . . . . . . . . . . . 4 Repair . . . . . . . . . . . . . . . . . . . . . . . . ...
Operation 4 311717E Operation Pressure Relief Procedure 1. Engage trigger lock. 2. Air-Powered Pumps only: Close the bleed-type master air valve. Hydraulic-Powered Pumps only: Close the hydraulic supply line valve first, then the return line valve. 3. Disengage the trigger lock. 4. Hold a metal part...
Repair 311717E 5 Repair Disconnect the Lower 1. Flush the pump, if possible. Relieve the pressure, see Pressure Relief Procedure on page 4. 2. Disconnect the hoses from the lower and plug the ends to prevent fluid contamination. 3. Remove the pump from its mounting and place it in a vise. 4. Disconn...
