Graco GC-1393G - Manual
Graco GC-1393G – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Contents
- Page 3 – Warnings; Splatter Hazard; WARNING; WARNING
- Page 4 – Pressurized Aluminum Parts Hazard; Plastic Parts Cleaning Solvent Hazard; Skin Injection Hazard; - Use with UL1450 Compliance
- Page 5 – Important Safety Information; Polyester Resins and Gel-Coats; Isocyanate Conditions
- Page 7 – Hose Attachment
- Page 8 – Parts
- Page 9 – Assembly Drawings
- Page 12 – Daily Maintenance; Pressure Relief Procedure
- Page 13 – Maintenance; Notice
- Page 15 – Dispense Tip Reference Chart; Part; Options
- Page 17 – Technical Data; Category
- Page 18 – Graco Ohio Standard Warranty; Graco Ohio Information
Important Safety Instructions
Read all warnings and instructions in
this manual. Save these instructions.
Operation
Formula-X
GC-1393G
ENG
Low emission external-mix dispense gun for use with polyester resin and gel coat.
For professional use only.
Maximum fluid working pressure:
2000 psi. (14 MPa, 138 bar)
Maximum air pressure:
100 psi. (0.7 MPa, 7 bar)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 GC-1393F Contents Warnings .......................................................... 3 Important Safety Information ......................... 5 Grounding ........................................................ 6 Set-Up ............................................................... 7 Parts ........
3 GC-1393F Warnings The following warnings are for the setup, use, grounding, maintenance, and repair of this equipment. The exclamation point symbol alerts you to a general warning and the hazard symbol refers to procedure- specific risk. Refer back to these warnings. Additional, product-specific w...
4 GC-1393F WARNING SKIN INJECTION HAZARD High-pressure fluid from gun, hose leaks, or ruptured components will pierce skin. This may look like just a cut, but it is a serious injury that can result in amputation. Get immediate surgical treatment. • Do not point gun at anyone or at any part of the bo...
