Graco 9593A - Manual

Graco 9593A

Graco 9593A – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
Page: / 4

Table of Contents:

  • Page 2 – Installation; Operation; WARNING
  • Page 3 – Parts List
  • Page 4 – Graco Warranty; Graco Phone Number
Loading the manual

309047

Rev. A

Airless spray

gun not included

9593A

Operating Instructions

INSTRUCTIONS

This manual contains important
warnings and information.
READ AND KEEP FOR REFERENCE.

Pressure Roller

Model 243066, Series A

D

20 in. (50 cm) heavy-duty extension

D

45

_

swivel adapter

D

9 in. (23 cm) roller frame

D

1/2 in. (13 mm) nap roller cover

3600 psi (24.8 MPa, 248 bar) Maximum Fluid Inlet Pressure

*

This maximum pressure is only possible if the roller frame is
completely plugged. The best operating pressure is the lowest
pressure that provides an even paint supply to the roller and
typically does not exceed 300 psi (2.1 MPa, 21 bar).

*

GRACO INC.

P.O. BOX 1441

MINNEAPOLIS, MN

55440–1441

E

COPYRIGHT 2000, GRACO INC.

Graco Inc. is registered to I.S. EN ISO 9001

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Installation; Operation; WARNING

2 309047 Warnings and Cautions Preventing Corrosion Damage and Freezing CAUTION Never leave water in the pump, gun, or pressure roller. Doingso could cause corrosion and damage from freezing. Forstorage, flush the system with Graco Pump Armor t or mineral spirits/paint thinner. See Flushing on page ...

Page 3 - Parts List

309047 3 Flushing This is the procedure for flushing the pressure roller.The pump and gun you are using may have additionalflushing steps, such as cleaning filters and screens.See the pump and gun flushing instructions. NOTE: Leave the pressure roller attached to the gun for this procedure. See Pres...

Page 4 - Graco Warranty; Graco Phone Number

4 309047 Graco Warranty Graco warrants all equipment manufactured by Graco and bearing its name to be free from defects in material and workmanship on thedate of sale by an authorized Graco distributor to the original purchaser for use. With the exception of any special, extended, or limitedwarranty...

Other Graco Models

All Graco Other