Graco 77X540 - Manual
Graco 77X540 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Instructions; Warnings; Installation; Pressure Relief
- Page 3 – Vent Valve Installation
- Page 5 – Parts; Accessories; Technical Data
- Page 6 – Dimensions
Instructions
Dyna-Star
®
HP Vent
Valve Kit
Used with the Dyna-Star HP or HF Pump to reduce system pressure and allow injector to
reset. For professional use only.
Part No.: 77X540
Maximum Working Pressure: 3500 psi (241 bar, 24 MPa)
Important Safety Instructions
Read all warnings and instructions in this
manual and the Dyna-Star HP and HF Pump
instruction manual included with your unit. Save
all instructions.
332519F
EN
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Instructions 2 332519F Instructions Warnings See the Dyna-Star HF and HP Pump Instruction manual for additional warnings. Installation Pressure Relief Follow the Pressure Relief Procedure whenever you see this symbol. To relieve pressure in the system, use two wrenches working in opposite directions...
Instructions 332519F 3 Vent Valve Installation Reference numbers used in these instructions corre-spond to Parts included in Kit and are provided on page 5. Parts identified with an alpha character are user pro-vided or already installed components. To ensure the correct pressure relief valve is use...
Parts 332519F 5 Parts Accessories Technical Data . * Dyna-Star HP Pump Models are rated for 5000 psi (34.47 MPa, 344 bar) maximum working pressure, however, when a vent valve is installed on the HP Pump, the maximum working pressure must be reduced to 3500 psi (24.1 MPa, 241 bar). **Flow capability ...
