Graco 3A2573D- User Manual
Graco 3A2573D– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Contents; WARNING
- Page 4 – Component Identification; Schematic View
- Page 5 – Pressure Relief Procedure; Relieve A and B Fluid Pressure
- Page 6 – Installation
- Page 8 – Parts
- Page 10 – Technical Data
- Page 12 – Graco Standard Warranty; Graco Information
Instructions-Parts
Gun Splitter Valve
Use to operate one or two spray guns with one proportioner or premixed paint in a 1K
sprayer. Provides independent flushing of each gun while the other gun remains in use.
For professional use only.
262826 (includes carriage)
7250 psi (50 MPa, 500 bar) Maximum Material Working Pressure
5000 psi (35 MPa, 345 bar) Maximum Flush Inlet Working Pressure
Important Safety Instructions
Read all warnings and instructions in this
manual. Save these instructions.
3A2573D
EN
II 2 G
c IIB T5
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Graco 3A2573D
Summary
Warnings 2 3A2573D Contents Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Component Identification . . . . . . . . . . . . . . . . . . . . 4 Pressure Relief Procedure . . . . . . . . . . . . . . . . . . . 5 Installation . . . . . . . . . . . . . . . . . . . . . . . . ....
Component Identification 4 3A2573D Component Identification Key: A Gun #1 Material Shutoff Valve B Gun #1 Solvent Shutoff Valve C Solvent Inlet Port D Mixed Material Inlet Port E Gun #2 Solvent Shutoff Valve F Gun #2 Material Shutoff Valve G Gun #2 Outlet Port H Gun #1 Outlet Port J Optional Mixed M...
Pressure Relief Procedure 3A2573D 5 Pressure Relief Procedure Follow the Pressure Relief Procedure whenever you see this symbol. Relieve A and B Fluid Pressure 1. Engage the trigger lock. 2. Close the main air shutoff valve (CA) on your pro-portioner pump or 1K sprayer. 3. Shut off heaters, if used....
