Graco 3A1324B- User Manual
Graco 3A1324B– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Warnings; WARNING
- Page 3 – Remove the Alternator
- Page 4 – Install the Kit; Component Installation
- Page 5 – Install the Power CAN Cables; Systems with a USB Module
- Page 6 – Power Connection; Ground; POWER
- Page 8 – Graco Standard Warranty
Instructions/Parts
16G351 Electric Power
Conversion Kit
3A1324B
EN
Converts ProMix 2KE Electronic Proportioners from an intrinsically safe air-powered
alternator power supply to a non-intrinsically safe electric power supply.
For professional use only.
Not approved for use in European explosive atmosphere locations.
Kit Parts
Important Safety Instructions
Read all warnings and instructions in this
manual and your separate ProMix 2KE
manuals. Save these instructions.
Converting the ProMix 2KE proportioner from an
air-powered alternator power supply to an electric
power supply voids the intrinsically safe rating of the
equipment.
Ref.
Part
Description
Qty.
401
15V747 POWER SUPPLY, 24 VDC, 2.5 A,
60 watt, B-code
1
402
116320 SWITCH, rocker, power
1
403
115306 FILTER, power line
1
404
114095 BLOCK, terminal
1
405
112144 SCREW, machine, pan head
4
406
109467 SCREW, machine, pan head
2
407
103833 SCREW, machine
2
408
100139 PLUG, pipe
1
410
16H077 HARNESS, 2-wire; 8 in. (203 mm)
1
411
16H078 HARNESS, 3-wire; 4 in. (102 mm)
1
413
15V206 CABLE, CAN; 10 ft (3 m)
1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Graco 3A1324B
Summary
Warnings 2 3A1324B Warnings The following warnings are for the setup, use, grounding, maintenance, and repair of this equipment. The exclama-tion point symbol alerts you to a general warning and the hazard symbols refer to procedure-specific risks. When these symbols appear in the body of this manua...
Remove the Alternator 3A1324B 3 Remove the Alternator 1. Shut off the system’s main air valve. Open the con-trol box. 2. See F IG . 1. Disconnect output power cable connec- tions from alternator module (A). Disconnect ground lead (G) from control box ground terminal (T). 3. Disconnect the power supp...
Install the Kit 4 3A1324B Install the Kit Component Installation 1. Shut off electrical power at the main panel. 2. See F IG . 2. Remove the square knockout in the side of the control box. Install the power switch (402). 3. Install the power supply (401), line filter (403), and terminal block (404),...
