Graco 3A1323C- User Manual
Graco 3A1323C– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Warnings; WARNING
- Page 3 – Remove the Electric Power Supply Components
- Page 4 – Install the Alternator; Install the Air Regulator
- Page 5 – Install the Power CAN Cables
- Page 6 – Graco Standard Warranty
Instructions/Parts
16G353 Alternator
Conversion Kit
3A1323C
EN
Converts ProMix 2KE Electronic Proportioner from an electric power supply to an
air-powered alternator power supply. For professional use only.
Not approved for use in European explosive atmosphere locations.
For patent information, see www.graco.com/patents
Kit Parts
Important Safety Instructions
Read all warnings and instructions in this
manual and your separate ProMix 2KE
manuals. Save these instructions.
Converting the ProMix 2KE proportioner from a line
power electric supply to an air-powered alternator
power supply does not provide an intrinsically safe
rating for the equipment.
Ref.
Part
Description
Qty.
501
255728 MODULE, alternator
1
502
15W017 VALVE, safety
1
503
156971 FITTING, nipple, short
1
504
115841 ELBOW
1
505
115243 REGULATOR, air, 1/4 npt
1
506
113915 UNION, swivel
1
507
112307 ELBOW
1
508
104655 GAUGE, pressure
1
509
103833 SCREW, machine
4
510
100284 NUT, hex
1
511
15B090 WIRE, grounding
1
512
112514 FERRULE, not shown
1
513
---
TUBE, exhaust, black; 1/2 in. (13
mm) OD
3
514
---
TUBE, air; 3/8 in. (10 mm) OD
1
515
123278 CABLE, CAN; 10 ft (3.05 m)
1
516
16G374 CABLE, CAN, f x m; 2 ft (0.6 m)
1
517
15U531 CABLE, CAN, f x f; 2 ft (0.6 m)
1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Graco 3A1323C
Summary
Warnings 2 3A1323C Warnings The following warnings are for the setup, use, grounding, maintenance, and repair of this equipment. The exclama-tion point symbol alerts you to a general warning and the hazard symbols refer to procedure-specific risks. When these symbols appear in the body of this manua...
Remove the Electric Power Supply Components 3A1323C 3 Remove the Electric Power Supply Components 1. Disconnect main power. Open the control box. 2. See F IG . 1. Disconnect the three input wires from the terminal block (TB). Pull the wires out of the con-trol box and disconnect them at the main pow...
Install the Alternator 4 3A1323C Install the Alternator 1. See F IG . 3. Mount the alternator module (501) to the control box using four screws (509). 2. Connect the alternator ground wire (511) to the con-trol box ground terminal (T), using ferrule (512). Install the Air Regulator 1. Remove the plu...
