Graco 3A1315A- Manual
Graco 3A1315A– Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Contents
- Page 3 – Installation
- Page 5 – Operation
- Page 6 – Troubleshooting
- Page 7 – Repair
- Page 8 – Kit Parts
- Page 10 – Technical Data
- Page 11 – Notes
- Page 12 – Graco Standard Warranty; Graco Information
Instructions-Parts
3A1315A
24G621 Agitator Speed Controller
Accessory
ENG
Accessory kit to control and automatically maintain the speed of an air-powered agitator.
For professional use only.
Important Safety Instructions
Read all warnings and instructions in this manual
and in your separate agitator manual. Save these instructions.
Patent Pending
TI17253a
PROVEN QUALITY. LEADING TECHNOLOGY.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Graco 3A1315A
Summary
Contents Installation................................................... ....... 3Operation ...................................................... ..... 5Troubleshooting.................................................. 6Repair......................................................... ....... 7 Kit P...
Installation The agitator speed controller fits the following Graco pneumatic rotary motors: Motor Part No.10114016A871101388111310 NOTE: Before installing, ensure that the agitator air motor has at least 5 in. (12.7 cm) of vertical clearance and 4 in. (10.2 cm) of horizontal clearance in all directi...
Operation Connect the main air line to the quick disconnect fitting (28) on the agitator speed controller. Do not exceed the maximum air inlet pressure of 100 psi (0.7 MPa, 7.0 bar).Set the agitator speed using the knob (16) on the top of the speed controller. Turn the knob counterclockwise (outward)...
