Graco 3A1309B- User Manual
Graco 3A1309B– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Instructions
Paint Gun Stencil Kit for Line Striping
System
Model 24G778, Series A
3300 psi (22.7 MPa, 227 bar) Maximum Working Pressure
Important Safety Instructions
For complete warnings and safety instructions see RoadLazer
™
RoadPak
™
Line Striper System manual. Save these instructions.
ti16518a
ti109493c
3A1309B
EN
Pressure Relief Procedure
The system pressure must be manually relieved to pre-
vent the system from starting or spraying accidentally.
Fluid under high pressure can be injected through the
skin and cause serious injury. To reduce the risk of an
injury from injection, splashing fluid, or moving par ts,
follow the
Pressure Relief Procedure
in manual
3A1214 whenever you:
•
are instructed to relieve the pressure
•
stop spraying
•
check or service any of the system equipment
•
install or clean the spray tip
Works in conjuction with hand bead gun kit
P/N 238957
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
