Graco 3A1292C- User Manual
Graco 3A1292C– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Component / Replacement Kit Identification
- Page 3 – Before You Start
- Page 4 – Setup Instructions
- Page 5 – CAUTION
- Page 8 – Back Pack Strap Adjustment; Shoulder Straps
- Page 10 – Graco Standard Warranty; Graco Information
3A1292C
Operation
Pro Pack
™
Portable Spray Pack
- For use with Graco hand-held sprayers (except Fine-Finish sprayers) -
- For portable spray applications of water-based and oil-based (mineral spirit-type)
architectural paints and coatings only -
- Not approved for use in explosive atmosphere locations -
Model 24F893
Maximum Working Pressure 12 psi (0.83 bar, 0.083 MPa)
IMPORTANT SAFETY INSTRUCTIONS
For complete warnings and safety
instructions, see sprayer manual.
EN
ti16502a
WARNING
WARNING
WARNING
WARNING
FIRE AND EXPLOSION HAZARD
Use only water-based or oil-based (mineral spirit-type) materials with flash point greater than 100° F
(38° C).
Do not use materials which state “FLAMMABLE” on the packaging. For more information about
your material, request MSDS from distributor or retailer.
Use oil-based material outdoors or in a well-ventilated indoor area with a flow of fresh air.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Component / Replacement Kit Identification 2 3A1292C Component / Replacement Kit Identification ti16522a 1 2 3 4 5 11 10 12 7 6 2a 2b 2c 2d 4a 4b 12a 12b 11a 9 8 Ref. Part Description 1 115489 Hose clamp 2 24H367 Gasket kit 2a 125026 Grommet 2b 115099 Washer, garden hose 2c 16G375 Seal, reservoir 2d...
Before You Start 3A1292C 3 Before You Start The ProPack Portable Spray Pack is shipped with a bat-tery inside the air compressor which must be connected before operation. 1. Remove contents from backpack including any packing materials. 2. Remove air compressor from reservoir lid. 3. Open battery do...
Before You Start 4 3A1292C Setup Instructions 1. Perform Pressure Relief Procedure (see sprayer manual). 2. Remove sprayer battery or unplug sprayer. 3. Remove material cup (M) and suction tube (T). 4. Align hose set adapter (A) with sprayer inlet (B) and insert into sprayer. Thread hose set adapter...
