Graco 310791A- User Manual
Graco 310791A– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Graco Inc. P.O. Box 1441 Minneapolis, MN 55440-1441
Copyright 2004, Graco Inc. is registered to I.S. EN ISO 9001
310791
Rev. A
Instructions
RACX Solvent Seals
Model 248936
4050 psi (280 bar) Maximum Working Pressure
•
Use when spraying fluids containing corrosive solvents
•
Use with RACX series SwitchTips only.
•
Graco RACX SwitchTip sold separately
WARNING
To reduce the risk of fluid injection or splashing in the eyes or on the skin, relieve air and fluid pressure in the system before
installing, cleaning or changing tips. See Pressure Relief Procedure in gun or sprayer manual.
•
Keep clear of spray tip. High-pressure spray or leaks can inject fluid into the body, resulting in serious injury which may
require amputation. Never spray without a tip guard (D).
•
Do not exceed 4050 psi (280 bar, 28 MPa) maximum working pressure.
Failure to install or use the RAC
™
tip guard assembly correctly may result in an undirected spray of fluid into the eyes or on the
skin of the operator. Be sure you:
•
Fully insert SwitchTip (A) into tip bore (C) in guard
•
Do not trigger gun with SwitchTip handle between Spray and Clear positions
•
Replace OneSeal when replacing worn SwitchTip
Installing
Disassembling
Clearing a Clogged Tip
Note:
If SwitchTip is still clogged, follow Pressure Relief Procedure in gun or sprayer manual, and remove SwitchTip for cleaning.
A
B
C
D
Use end of pencil (A) to press OneSeal
(B) into tip guard (D), with curve matching
tip bore (C)
ti2508b
Insert SwitchTip in tip bore and firmly
thread assembly onto gun
Use SwitchTip handle to remove OneSeal
from tip guard
Engage gun safety and rotate
SwitchTip handle to Clear
position
Disengage gun safety and
trigger gun into pail to clear
SwitchTip
Engage gun safety and rotate
SwitchTip handle to Spray
position
Disengage gun safety and
trigger gun into pail to verify
SwitchTip is clear
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
