Graco 309643B- User Manual
Graco 309643B– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Installation; Pressure Relief Procedure
- Page 3 – Metal Fluid Section Pumps; Disassembly of Inlet and Outlet Manifolds
- Page 4 – Disassembly of Fluid Covers
- Page 6 – Reassembly of Fluid Covers
- Page 7 – Plastic Fluid Section Pumps
- Page 12 – Graco Standard Warranties; Graco Information
Graco Inc. P.O. Box 1441 Minneapolis, MN 55440-1441
Copyright 2002, Graco Inc. is registered to I.S. EN ISO 9001
Instructions
Stainless Steel Air
Motor Conversion Kits
309643B
Conversion Kit 246450
For 1040 Pumps
Conversion Kit 246451
For 1590 Pumps
Conversion Kit 246452
For 2150 Pumps
Model 246450
Model 246522
Model 246451
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Installation 2 309643B Installation Pressure Relief Procedure 1. Shut off the air to the pump 2. Open the dispensing valve, if used 3. Open the fluid drain valve to relieve all fluid pres- sure, having a container ready to catch the drainage Record Pump Information Before you install the new stainle...
Installation 309643B 3 Metal Fluid Section Pumps Disassembly of Inlet and Outlet Manifolds 1. Relieve the pressure , see page 2. Disconnect all hoses. 2. Remove the pump from its mounting. 3. Remove the bolts (106) holding the outlet manifold (103) to the fluid covers (101). See F IG . 1. 4. Remove ...
Installation 4 309643B Disassembly of Fluid Covers 1. Remove the screws (106) holding the fluid covers (101) to the air covers (23). Pull the fluid covers (101) off the pump. See F IG . 2. 2. Loosen but do not remove the diaphragm shaft bolts (107) on both ends. 3. Unscrew one bolt from diaphragm sh...
