Graco 309640A- User Manual
Graco 309640A– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
WARNING
To reduce the risk of fluid injection or splashing in the eyes or on the skin, relieve air and fluid pressure in the system before installing, cleaning or
changing tips. See
Pressure Relief Procedure
in gun or sprayer manual.
S
Keep clear of spray tip.
High-pressure spray or leaks can inject fluid into the body, resulting in serious injury which may
require amputation. Never spray without a tip guard (D).
S
Do not exceed 4050 psi (280 bar, 28 MPa) maximum working pressure.
Failure to install or use the RAC
t
tip guard assembly correctly may result in an undirected spray of fluid into the eyes or on the skin of the operator.
Be sure you:
S
Fully insert SwitchTip (A) into tip bore (C) in guard
S
Do not trigger gun with SwitchTip handle between
Spray
and
Clear
positions
S
Replace OneSeal
t
when replacing worn SwitchTip
B
A
C
D
Insert SwitchTip in tip bore and firmly thread
assembly onto gun
Use SwitchTip handle to remove OneSeal
from tip guard
Clearing a Clogged SwitchTip
Disassembling
Engage gun safety and rotate
SwitchTip handle to
Clear
posi-
tion
1
2
3
4
1
2
Disengage gun safety and trigger
gun into pail to clear SwitchTip
Engage gun safety and rotate
SwitchTip handle to
Spray
posi-
tion
Disengage gun safety and trigger gun
into pail to verify SwitchTip is clear
Note
:If SwitchTip is still clogged, follow
Pressure Relief Procedure
in gun or sprayer manual, and remove SwitchTip for
cleaning.
Clear
position
Spray
position
Use end of SwitchTip (A) to press OneSeal
(B) into tip guard (D), with curve matching tip
bore (C)
Installing
ti2508a
Instructions
RACX HandTite
t
Guard
Model 246215, Series A, 7/8 in. Guard
4050 psi (280 bar) Maximum Working Pressure
Model 246437, Series A, 11/16 in. Guard
4050 psi (280 bar) Maximum Working Pressure
D
Patented aerodynamic design virtually eliminates paint buildup.
D
Hand tighten on gun–no tools required.
D
Fits all Graco airless spray guns.
D
Use with RACX series SwitchTips only.
D
Graco RACX SwitchTip sold separately.
309640A
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
