Graco 309133c- User Manual
Graco 309133c– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Symbols; Warning Symbol; Caution Symbol; CAUTION; WARNING; EQUIPMENT MISUSE HAZARD
- Page 4 – FIRE AND EXPLOSION HAZARD; TOXIC FLUID HAZARD; HOT SURFACE AND FLUID HAZARD
- Page 5 – MOVING PARTS HAZARD; INJECTION HAZARD
- Page 6 – Unpacking and Repacking; Unpacking the Product
- Page 7 – Overview; Description; Typical Installation
- Page 8 – Installation; Ground The System; General Information
- Page 9 – Pressure Compensator Set Up
- Page 11 – Maintenance
- Page 12 – Troubleshooting
- Page 13 – Service; Disassembly; Reassembling the Compensator
- Page 15 – Notes
- Page 16 – Parts List; Note: The parts listed below are not used in all models.
- Page 17 – Parts
- Page 20 – Wiring Diagram
- Page 21 – Repair Kits and Accessories
- Page 23 – Dimensions; Side View
- Page 24 – Graco Standard Warranty; Graco Phone Numbers
Instructions
GRACO INC.ąP.O. BOX 1441ąMINNEAPOLIS, MNą55440-1441
Copyright 2000, Graco Inc. is registered to I.S. EN ISO 9001
Pressure
Compensating Valve
The pressure compensating valve minimizes the effects of pressure changes from the fluid source and
reduces or eliminates material flow variances caused by piston pump changeover and unbalanced
pump lowers. Eliminating surge variations adds consistency to the application process.
The pressure compensating valve is used:
in applications requiring a consistent bead size throughout the dispense cycle.
to overcome the initial surge of material when the dispense valve is opened in a deadhead system.
with single component materials when viscosities are generally greater than 100,000 cps.
309133C
Read warnings and instructions.
See page 2 for compensator part nos., ratios,
and working pressures.
Model 243656 Shown
TI0368B
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
309133 3 Symbols Warning Symbol WARNING This symbol alerts you to the possibility of seriousinjury or death if you do not follow the instructions. Caution Symbol CAUTION This symbol alerts you to the possibility of damage toor destruction of equipment if you do not follow theinstructions. WARNING IN...
4 309133 WARNING FIRE AND EXPLOSION HAZARD Improper grounding, poor ventilation, open flames or sparks can cause a hazardous condition and re-sult in a fire or explosion and serious injury. Ground the equipment and the object being sprayed. Refer to Grounding on page 8. If there is any static sparki...
309133 5 WARNING MOVING PARTS HAZARD Moving parts, such as the air motor piston, can pinch or amputate your fingers. Keep clear of all moving parts when starting or operating the pump. Before servicing the equipment, follow the Pressure Relief Procedure on page 10 to prevent the equipment from start...
