Graco 309004C- Manual
Graco 309004C– Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Table of Contents
- Page 3 – Warning Symbol; Equipment Misuse Hazard
- Page 4 – Fire, Explosion, and Electric Shock Hazard
- Page 5 – Electrical Connections
- Page 6 – Pneumatic Connections
- Page 9 – Operation; Priming the Pump; Troubleshooting; Problem
- Page 10 – Parts
- Page 11 – Typical Installation Diagram; CycleFlo II Controller
- Page 12 – Technical Data
- Page 13 – Mounting Hole Layout
- Page 14 – Graco Standard Warranty; Graco Phone Number
Instructions/Parts List
CycleFlo II
309004C
ENG
Pneumatic Pump Controller
Controls pump speed for precise batching, metering, and dosing of fluids at high or low
pressures and flow rates.
Not for use in explosive atmospheres.
Part No. 195265
120 psi (0.8 MPa, 8 bar) Maximum Air Working
Pressure
Integrated Air Valves with Silenced Exhaust
Infinite Cycle Rate Adjustment Between 10 and
200 cpm
Standard 120 VAC Power
Important Safety Instructions
Read all warnings and instructions in this manual.
Save these instructions.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Graco 309004C
Summary
Table of Contents Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 General Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Installation . . . . . . . . . . . . . . . . . ...
Warning Symbol Caution Symbol This symbol alerts you to the possibility of serious injury or death if you do not follow the instructions. This symbol alerts you to the possibility of damage to or destruction of equipment if you do not follow the instructions. Equipment Misuse Hazard Equipment misuse...
Fire, Explosion, and Electric Shock Hazard Improper grounding, poor air ventilation, open flames, or sparks can cause a hazardous condition and resulting fire or explosion and serious injury. • Ground the equipment. • Proper grounding dissipates static electricity generated in the equipment. • This ...
