Graco 308883S- User Manual
Graco 308883S– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Warnings; WARNING
- Page 3 – Installation; Grounding
- Page 4 – Mounting
- Page 5 – Operation; Pressure Relief Procedure
- Page 6 – Repair; Displacement Pump Service
- Page 8 – Air Motor and Throat Service
- Page 10 – Air Motor and Throat Seals; Reassembly
- Page 11 – Troubleshooting
- Page 12 – Parts
- Page 14 – Dimension Drawings
- Page 15 – Technical Data
- Page 16 – Graco Standard Warranty; Graco Information
308883S
EN
Instructions
50:1 Fire-Ball
®
300
Pump
For pumping non-corrosive and non-abrasive greases and lubricants only.For
professional use only.
Model No. 239877, Series D
pail length
Model No. 239887, Series D
120 lb drum length
Model No. 239888, Series D
400 lb drum length
8400 psi (58 MPa, 580 bar) Maximum Working Pressure
140 psi (0.97 MPa, 9.7 bar) Maximum Air Input Pressure
Important Safety Instructions
Read all warnings and instructions in this
manual. Save these instructions.
This product is designed to be used only in pumping
non-corrosive and non-abrasive lubricants and
greases. Any other use can cause unsafe operating
conditions and result in component rupture, fire, or
explosion, which can cause serious injury including
fluid injection.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Warnings 2 308883S Warnings The following warnings are for the setup, use, grounding, maintenance, and repair of this equipment. The exclama-tion point symbol alerts you to a general warning and the hazard symbols refer to procedure-specific risks. When these symbols appear in the body of this manua...
Installation 308883S 3 Installation Grounding Pump: Use a ground wire and clamp as shown in F IG . 1. Fluid hoses: Use only electrically conductive hoses. Air compressor: Follow manufacturer’s recommenda- tions. Fluid supply container: Follow the local code. To maintain grounding continuity when flu...
Installation 4 308883S Mounting 1. Plan the mounting layout for easy operator access to the pump air controls, sufficient room to change drums and a secure mounting platform. 2. If using a follow plate (H), remove the drum cover. Scoop the material to the center of the drum. Place the plate on the m...
