Graco 308455K - Manual - manualsarea.com

Page 2 - Warning Symbol; Caution Symbol; CAUTION; WARNING; PRESSURIZED FLUID HAZARD

2 308455 Table of Contents Warnings 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Setup 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ground the system 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . System Component I...

Page 3 - EQUIPMENT MISUSE HAZARD; TOXIC FLUID HAZARD

3 308455 WARNING INSTRUCTIONS EQUIPMENT MISUSE HAZARD Equipment misuse can cause the equipment to rupture, malfunction or start unexpectedly and result inserious injury. D This equipment is for professional use only. D Read all instruction manuals, tags, and labels before operating the equipment. D ...

Page 4 - Setup; Prepare the operator.

4 308455 Setup CAUTION This equipment is compatible with most water-basedmaterials. See the wetted parts in the TechnicalData section and your fluid and solvent manufactur-er ’s compatibility information. I. Prepare the operator. All persons who operate the system should be trainedin the safe, effic...

Page 7 - System Component Information; How to use the AirPro gun; CW

7 308455 System Component Information I. How to use the AirPro gun See Fig. 2. 1. Make all fluid and air adjustments at the pressurepot for maximum efficiency. Refer to page 8. 2. If you make adjustments at the gun, take note ofwhat you do. Then, if the results are not satisfac-tory, you can easily ...

Page 8 - How to adjust the air regulators.; Safety relief valve

8 308455 System Component Information II. How to adjust the air regulators. See Fig. 4. 1. Always open air regulators slowly to preventsurging during startup. 2. As you look at the system, the regulator (36) onthe right controls air to the gun and the regulator(33) on the left controls air to the pr...

Page 9 - Operation; Pressure Relief Procedure.

9 308455 Operation I. Pressure Relief Procedure. WARNING PRESSURIZED EQUIPMENT HAZARDThe system pressure must be manually relieved toprevent the system from starting or spraying acci-dentally. To reduce the risk of an injury from acci-dental spray from the gun, splashing fluid, ormoving parts, follo...

Page 10 - Set the fluid and air pressure.; When to shut down the system.

10 308455 Operation IV. Set the fluid and air pressure. 1. With the system primed and the gun air regulatorclosed (36), trigger the gun and adjust the pressurepot air regulator (33). Refer to Fig. 5. If available, usethe pressure setting provided by your fluid supplier.Otherwise, use the following i...

Page 11 - Flushing

11 308455 Flushing I. When to flush. D Before the first time use D When changing colors D Before fluid can dry or settle out in a dormantsystem (observe the recommended fluid pot life oncatalyzed fluids) D Before storing the system II. How to flush. See Fig. 9. 1. Relieve pressure. 2. Remove the air...

Page 12 - Parts

12 308455 Parts Model 237409, Series B Includes items 1 to 44 Ref.No. Part No. Description Qty. Ref.No. Part No. Description Qty. 1 100361 PLUG 1 2 100840 ELBOW, street, 1/4-18 npt(m x f) 2 3 164724 HOSE, coupled, 1/8-27 npt(m) 1 4 103347 PRESSURE RELIEF VALVE, 100 psi (0.7 MPa, 7 bar), 1/4-18 npt(m...

Page 16 - Notes

Page 17 - Technical Data

17 308455 Technical Data Maximum Fluid Working Pressure 100 psi (0.7 MPa, 7 bar) . . . . . . . . . . . . . . . . . . . Maximum Air Working Pressure 100 psi (0.7 MPa, 7 bar) . . . . . . . . . . . . . . . . . . . . . Gun Air Consumption See manual 312414 . . . . . . . . . . . . . . . . . . . . . . . ....

Graco 308455K - Manual

Table of Contents:

Summary

Other Graco Models