Graco 308118NStainless- User Manual

Graco 308118NStainless

Graco 308118NStainless– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
22 Page 22
23 Page 23
24 Page 24
25 Page 25
26 Page 26
27 Page 27
28 Page 28
Page: / 28

Table of Contents:

  • Page 2 – Warning Symbol; Caution Symbol; CAUTION; WARNING; EQUIPMENT MISUSE HAZARD
  • Page 3 – SKIN INJECTION HAZARD
  • Page 4 – FIRE AND EXPLOSION HAZARD; TOXIC FLUID HAZARD
  • Page 5 – Installation; Grounding
  • Page 6 – Typical Installation
  • Page 7 – System Accessories; Mounting Accessories
  • Page 8 – Notes
  • Page 9 – Operation; Pressure Relief Procedure; Flush the Pump Before Using
  • Page 10 – Starting and Adjusting the Pump; Shutdown and Care of the Pump
  • Page 13 – Troubleshooting
  • Page 14 – Service; Disconnecting the Displacement Pump; Reconnecting the Displacement Pump
  • Page 15 – Displacement Pump Service
  • Page 18 – Parts
  • Page 23 – Fluid Outlet Pressure Chart; Air Consumption Chart
  • Page 26 – Dimensions
Loading the manual

Instructions–Parts List

308118N

EN

SEVERE-DUTY, UHMWPE/PTFE PACKED

Stainless Steel Pumps

55 gallon (200 liter) drum size, with bung adapter.
For transfer and supply of solventborne and waterborne finishing materials.
For professional use only.

Important Safety Instructions
Read all warnings and instructions in this manual.
Save these instructions.

See page 2 for table of contents.

Model 224348, Series C
10:1 Ratio President

r

Pump

Model 256713, Series A
10:1 Ratio President

r

Pump (1.5 in. Female Inlet)

1800 psi (12.4 MPa, 124 bar) Maximum Fluid Working Pressure
180 psi (1.25 MPa, 12.5 bar) Maximum Air Inlet Pressure

Model 224350, Series C
5:1 Ratio Monark

r

Pump

Model 256714, Series A
5:1 Ratio Monark

r

Pump (1.5 in. Female Inlet)

900 psi (6.3 MPa, 63 bar) Maximum Fluid Working Pressure
180 psi (1.25 MPa, 12.5 bar) Maximum Air Inlet Pressure

0200A

MODEL 224348 SHOWN

0359

II 1/2 G T2
ITS03ATEX11228

0359

II 1/2 G T2
ITS03ATEX11228

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Warning Symbol; Caution Symbol; CAUTION; WARNING; EQUIPMENT MISUSE HAZARD

2 308118 Table of Contents Warnings 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installation 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Operation 9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Troubleshoo...

Page 3 - SKIN INJECTION HAZARD

3 308118 WARNING SKIN INJECTION HAZARD Spray from the gun/valve, hose leaks, or ruptured components can inject fluid into your body andcause extremely serious injury, including the need for amputation. Fluid splashed in the eyes or on theskin can also cause serious injury. Fluid injected into the sk...

Page 4 - FIRE AND EXPLOSION HAZARD; TOXIC FLUID HAZARD

4 308118 WARNING FIRE AND EXPLOSION HAZARD Improper grounding, poor ventilation, open flames or sparks can cause a hazardous condition andresult in a fire or explosion and serious injury. Ground the equipment and the object being sprayed. Refer to Grounding on page 5. If there is any static sparking...

Other Graco Models

All Graco Other