Graco 307252P- User Manual

Graco 307252P

Graco 307252P– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
Page: / 6

Table of Contents:

  • Page 2 – WARNINGS; SKIN INJECTION HAZARD; EQUIPMENT MISUSE HAZARD
  • Page 3 – Installation; Dimensions
  • Page 4 – Service
  • Page 5 – Parts
  • Page 6 – The Graco Warranty and Disclaimers; Graco Information
Loading the manual

Instructions -- Parts List

307252P

EN

Important Safety Instructions

Read all warnings and instructions in this manual.
Save these instructions.

HIGH PRESSURE, MEDIUM VOLUME

“red alert” Filters

For filtration of common industrial paints and coatings in finishing
applications. For professional use only.

3000 psi (21.0 MPa, 210 bar) Maximum Working Pressure

10 gpm (38 liter/min) Flow Capacity
36 sq. in. (230 cm

2

) Filtering Area

Part No. 210090,

60 mesh (250 micron) element 108116

Part No. 210091,

100 mesh (149 micron) element 108117

Part No. 210092,

200 mesh (74 micron) element 108118

Part No. 104435,

without element

03731

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - WARNINGS; SKIN INJECTION HAZARD; EQUIPMENT MISUSE HAZARD

2 307252 WARNINGS High Pressure Spray Can Cause Serious Injury. Observe All Warnings. Read and understand all instruction manuals before operating equipment. SKIN INJECTION HAZARD General Safety This equipment is used in a system which generates very highfluid pressure. Spray from leaks or ruptured ...

Page 3 - Installation; Dimensions

3 307252 Installation To clean or service the filter without shutting down the system,install a dual filter or a filter bypass system as explained below. The numbers and letters in parentheses refer to Figs. 1, 2, and3 and the Parts Drawing. Accessories and Technical Data are on the page 5. NOTE: Al...

Page 4 - Service

4 307252 Service CAUTION If the filter will not be used for a while, thoroughly clean allthe parts in solvent and blow them dry before the paint driesand clogs the filter. To help prevent damaging the parts, donot clean them with a wire brush or sharp object. Indicator The indicator provides gradual...

Other Graco Models

All Graco Other