Graco 307016T - Manual

Graco 307016T

Graco 307016T – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
Page: / 12

Table of Contents:

  • Page 3 – Warnings; WARNING
  • Page 4 – Installation; Connect the Fluid Hose; Regulators or Circulating Adapters; Operation; To Adjust the Fluid Pressure; Service
  • Page 5 – Parts
  • Page 6 – Coupler Stems; Common Parts for Regulators
  • Page 7 – Straight Adapters
  • Page 9 – Circulating Adapters
  • Page 10 – Accessories
  • Page 12 – Graco Standard Warranty; Graco Information
Loading the manual

307016T

EN

Instructions - Parts

Fluid Controls and
Fittings

Part No. 223627, 208085, 223621, 208082, 223622, 223623, 223624, 208250,
214019, 223626, and 210097

200 psi (1.4 MPa, 14 bar) Maximum Inbound Fluid Pressure

Part No. 223625 and 223628

300 psi (2.1 MPa, 21 bar) Maximum Inbound Fluid Pressure

See page 2 for model information

Important Safety Instructions

Read all warnings and instructions in this
manual. Save these instructions.

ti02286a

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 3 - Warnings; WARNING

Warnings 307016T 3 Warnings The following warnings are for the setup, use, grounding, maintenance, and repair of this equipment. The exclama-tion point symbol alerts you to a general warning and the hazard symbols refer to procedure-specific risks. When these symbols appear in the body of this manua...

Page 4 - Installation; Connect the Fluid Hose; Regulators or Circulating Adapters; Operation; To Adjust the Fluid Pressure; Service

Installation 4 307016T Installation Connect the Fluid Hose Regulators or Circulating Adapters • Connect the fluid hoses to the 1/4 npsm(m) inlet and return fittings. Straight Adapter • Connect a hose to the 3/8 npsm(m) inlet fitting. Connect the Regulator or Adapter to the Gun Model 223622 • Screw t...

Page 5 - Parts

Parts 307016T 5 Parts Ref. No. Part No. Description Qty. 1 100166 NUT, hex mach; No. 10-32 1 2 102433 SCREW, set, hex socket; No. 10-32 x 3/4” 1 3 102980 NUT, hex; stainless steel; No. 4-40 1 4* 102982 O-RING; PTFE 1 5 103229 SCREW, cap, socket head; No. 8-32 x 3/8” 5 6 167244 RETAINER, spring 1 7 1...

Other Graco Models

All Graco Other