Graco 306860N- User Manual
Graco 306860N– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Symbols; Warning Symbol; Caution Symbol; CAUTION; WARNING; EQUIPMENT MISUSE HAZARD
- Page 3 – INJECTION HAZARD; TOXIC FLUID HAZARD
- Page 4 – Installation; Installing the Back Pressure Regulator
- Page 5 – SINGLE CIRCULATING SPRAY STATION
- Page 6 – Notes
- Page 7 – Operation; Pressure Relief Procedure; Adjusting the Regulator
- Page 8 – Maintenance; Flushing; Repairing
- Page 9 – Parts
- Page 11 – Accessories; Fluid Pressure Gauges; Technical Data
Instructions–Parts List
306860N
ENG
HIGH PRESSURE
Back Pressure Regulator
For use in a high pressure spray circulating system to regulate back pressure
to gun(s) and maintain proper pressure for circulation. For professional use
only.
Not approved for use in European explosive atmosphere locations.
CARBON STEEL REGULATORS
Part No. 206819, Series F
3000 psi (21 MPa, 207 bar) Maximum Working Pressure
1000–3000 psi (7–21 MPa, 70–207 bar)
Regulated Fluid Pressure Range
Part No. 222405, Series B
3000 psi (21 MPa, 207 bar) Maximum Working Pressure
0–1000 psi (0–7 MPa, 0–70 bar)
Regulated Fluid Pressure Range
STAINLESS STEEL REGULATOR
Part No. 238926, Series A
3000 psi (21 MPa, 207 bar) Maximum Working Pressure
1000–3000 psi (7–21 MPa, 70–207 bar)
Regulated Fluid Pressure Range
Table of Contents
Symbols
2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Warnings
2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation
4
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operation
7
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Maintenance
8
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Parts
9
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Accessories
11
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Technical Data
11
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Warranty
12
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Graco Phone Number
12
. . . . . . . . . . . . . . . . . . . . . . . . . .
06863
Important Safety Instructions
Read all warnings and instructions in this manual.
Save these instructions.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 306860 Symbols Warning Symbol WARNING This symbol alerts you to the possibility of seriousinjury or death if you do not follow the instructions. Caution Symbol CAUTION This symbol alerts you to the possibility of damage toor destruction of equipment if you do not follow theinstructions. WARNING IN...
306860 3 WARNING INJECTION HAZARD Spray from the gun, leaks or ruptured components can inject fluid into your body and cause extremelyserious injury, including the need for amputation. Fluid splashed in the eyes or on the skin can alsocause serious injury. D Fluid injected into the skin might look l...
4 306860 Installation The Typical Installations shown in Figs. 1 and 2 areonly guides in designing a system. For assistance indesigning a system to meet your needs, contact yourGraco distributor. Installing the Back Pressure Regulator 1. Install the back pressure regulator (A) in the spraygun return...
