Graco 306640E- User Manual

Graco 306640E

Graco 306640E– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
Page: / 4
Loading the manual

306–640

Rev. E

Supersedes D

First choice when

quality counts.

INSTRUCTIONS–PARTS LIST

INSTRUCTIONS

This manual contains important
warnings and information.
READ AND KEEP FOR REFERENCE.

Back Pressure Valve

300 psi (21 bar, 2.1 MPa) Maximum Inbound Pressure

180 psi (12.4 bar, 1.24 MPa) Maximum Regulated Pressure

Model 205–122, Series C

Equipment misuse can cause the equipment to rupture or malfunction and result in serious injury.

This equipment is for professional use only.

Read all instruction manuals, tags, and labels before operating the equipment.

Use the equipment only for its intended purpose. If you are uncertain about usage, call your Graco
distributor.

Do not alter or modify this equipment. Use only genuine Graco parts and accessories.

Check equipment daily. Repair or replace worn or damaged parts immediately.

Do not exceed the maximum working pressure of the lowest rated component in your system. This
equipment has a 300 psi (21 bar, 2.1 MPa) maximum inbound pressure and a 180 psi (12.4 bar,
1.24 MPa) maximum regulated pressure.

Use fluids and solvents which are compatible with the equipment wetted parts. Refer to the Tech-
nical Data
section of all equipment manuals. Read the fluid and solvent manufacturer’s warnings.

Comply with all applicable local, state, and national fire, electrical, and safety regulations.

PRESSURIZED EQUIPMENT HAZARD

Spray from the gun, hose leaks, or ruptured components can splash fluid in the eyes or on the skin
and cause serious injury.

Do not stop or deflect leaks with your hand, body, glove or rag.

Tighten all fluid connections before operating the equipment.

Follow the Pressure Relief Procedure on page 2 whenever you: are instructed to relieve pres-
sure; stop spraying; clean, check, or service the equipment; and install or clean the spray nozzle.

GRACO INC.

P.O. BOX 1441

MINNEAPOLIS, MN

55440–1441

COPYRIGHT 1994, GRACO INC.

Graco Inc. is registered to I.S. EN ISO 9001

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Other Graco Models

All Graco Other