Graco 287727 - Manual

Graco 287727

Graco 287727 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
Page: / 8

Table of Contents:

  • Page 2 – Warnings; WARNING
  • Page 4 – Pressure Relief Procedure; Trigger Lock; Pressure Relief Procedure
  • Page 5 – Installation; Flush and Spray
  • Page 6 – Parts; * 36 Valve Body Kit must be purchased separately
  • Page 7 – Parts List
  • Page 8 – Graco Standard Warranty
Loading the manual

Graco Inc. P.O. Box 1441 Minneapolis, MN 55440-1441

Copyright 2005, Graco Inc. is registered to I.S. EN ISO 9001

311103C

Instructions

Low Overspray
CleanShot

Valve

Model 287727

For use on the Graco Low Overspray Kit.

Includes RAC

®

5 321 SwitchTip

and RAC 5 HandTite

Guard.

3600 psi (25 MPa, 248 bar) Maximum Working Pressure

Important Safety Instructions

Read all warnings and instructions in this manual.
Save these instructions.

WLD

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Warnings; WARNING

Warnings 2 311103C Warnings The following general warnings are related to the safe setup, use, grounding, maintenance and repair of this equip-ment. In the text of this manual, the exclamation point symbol alerts you to a warning and the hazard symbol refers to specific risks. Refer back to these Ge...

Page 4 - Pressure Relief Procedure; Trigger Lock; Pressure Relief Procedure

Pressure Relief Procedure 4 311103C Pressure Relief Procedure 1. Engage trigger lock. 2. Close the bleed-type master air valve. 3. Disengage the trigger lock. 4. Hold a metal part of the gun firmly to a grounded metal pail. Trigger the gun to relieve pressure. 5. Engage the trigger lock. 6. Open all...

Page 5 - Installation; Flush and Spray

Installation 311103C 5 Installation Installing the Tip and Guard(Fig. 1 and Fig. 2) 1 Without the spray tip installed, start sprayer, turn the knob on the Low Overspray CleanShot Valve counter-clockwise to the FLUSH position (Fig. 2). 2 Flush and prime the spray system. 3 Follow the Pressure Relief ...

Other Graco Models

All Graco Other