Graco 256212 - Manual
Graco 256212 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Qty
- Page 3 – Pressure Relief Procedure; Hold metal part of gun firmly to a grounded metal; Instructions; Rotate valve stem with a pin punch until hole is per-
- Page 4 – Disassembly; Assembly; NOTICE
- Page 6 – International Offices:; Graco Information; cb
312933D
Instructions
Lacquer Conversion Kit 256212
Important Safety Instructions
Read all warnings and instructions in this manual and in the
sprayer operation manual. Save these instructions.
ti11870a
EN
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 312933D Lacquer Conversion Kit 256212 Ref. Part No. Description Qty . 1 117559 O-RING, CV-75, size 020 2 2 111507 O-RING, CV-75, size 013 1 3 111316 O-RING, CV-75, size 012 1 4 15D370 O-RING, CV-75, size 022 1 5 15D371 O-RING, CV-75, size 015 2 6 15D252 O-RING, CV-90, size 008 1 7 119400 SEALANT, ...
312933D 3 Pressure Relief Procedure 1. Turn power switch to OFF. 2. Unplug sprayer. 3. Turn knob (A) down to PRIME/DRAIN. 4. Hold metal part of gun firmly to a grounded metal pail. Pull gun trigger to relieve pressure. Instructions 1. Turn knob (A) up to SPRAY position. 2. Remove pin (B) with pin pu...
4 312933D X5, X7, LTS 15, and LTS 17 Pressure Control Replacement Disassembly 1. Unplug electrical cord and Relieve Pressure. See Pressure Relief Procedure on page 3. 2. X7 and LTS 17 Only: Remove underside shroud mounting screw (D). 3. Remove side shroud screws (E) (T-20 Torx). 4. Remove 4 front co...
