Graco 24V820 - Manual
Graco 24V820 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Warnings; DANGER
- Page 3 – Setup; Pressure Relief Procedure; WARNING
- Page 4 – OK
- Page 6 – Graco Standard Warranty; Graco Information
333428E
EN
Operation
JetRoller
™
For spray rolled application of architectural paints and coatings.
Not approved for use in explosive atmospheres or hazardous locations.
Model 24U170, 24U172, 24V820, 24V926, 24X605, 24V490,
24V491, 24V492, 24V493, 24W128, 24W129
3600 psi (24.8 MPa, 248.2 bar) Maximum Working Pressure
Important Safety Instructions
Read all warnings and instructions in this
manual and in your sprayer, in-line valve, and
CleanShot
™
manuals. Save all instructions.
Related Manuals
309642
CleanShot
™
Shutoff Valve
309315
Contractor
™
In-Line Valve
308244
180º Spray Nozzle
Model
Roller
Frame
Includes
TIP
In-Line Valve 45° Swivel
CleanShot
180° Swivel
24U170
9”
LTX721
24U172
9”
24V820
9”
24V926
9.5”
24X605
10.5”
LTX821
24V490
18 cm
PAA515
24V491
25 cm
PAA721
24V492
18 cm
PAA515
24V493
25 cm
PAA721
24W128
12” - 18”
WR1223*
24W129
12” - 18”
* - For 18” setting, see page 5 for additional tip options.
ti23593b
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Warnings 2 333428E Warnings The following warnings are for the setup, use, grounding, maintenance, and repair of this equipment. The exclamation point sym- bol alerts you to a general warning and the hazard symbols refer to procedure-specific risks. When these symbols appear in the body of this manu...
Setup 333428E 3 Setup Pressure Relief Procedure Follow the Pressure Relief Procedure whenever you see this symbol. 1. Engage trigger lock.2. Remove roller handle. 3. Close the bleed-type master air valve. Disengage the trigger lock. 4. Rotate the CleanShot knob fully counter-clockwise to the FLUSH p...
Setup 4 333428E ti23592a 1 Read your sprayer, in-line valve, and CleanShot manuals. Assemble JetRoller as shown. Snug extension fittings with wrenches.Then tighten another 1/4 turn [~100 in-lb (11 N • m)]. Attach to gun sprayer hose. Prime sprayer as directed in sprayer manual. 500 2000 2500 3000 0 ...
