Graco 24P687 - Manual
Graco 24P687 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Instructions; Connector Installation
- Page 3 – Component Wiring; Wiring Diagram; A Fuse
- Page 4 – Wiring Key; Parts; Accessories
Instructions
GLC 2200 Wiring
Connector Kit
Used to interface the GLC2200 Lubrication Controller to pump and pump accessories. For
professional use only.
Not approved for use in explosive atmospheres or hazardous locations.
Kit Nos.:
Single Connector Kit: 24P686
Multiple (5) Connectors Kit: 24P687
Kits are rated IP65.
make
Important Safety Instructions
Read all warnings and instructions in this
manual and the GLC 2200 Lubrication
Controller instruction manual included with your
unit. Save these instructions.
3A2992B
EN
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Instructions Connector Installation 1. Remove 2 to 3 inches of the outer insulation from one end of a user supplied cable (a) as shown in F IG . 1. NOTE: The cable should contain multicolored wires to ensure easy and accurate component installation. . 2. Strip each wire (b) to be crimped so approxim...
Instructions 3A2992B 3 Component Wiring 1. Before connecting wires to components verify the Connector end of the cable is NOT plugged into the GLC2200 controller. 2. Remove 2 to 3 inches of the outer insulation (a) from bare end of the cable as shown F IG . 4. . 3. Strip each wire (b) you are using ...
All written and visual data contained in this document reflects the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice. For patent information, see www.graco.com/patents. Original instructions. This manual contains Eng...
