Graco 24B241 - Manual
Graco 24B241 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Warnings; WARNING
- Page 3 – Assembly Instructions
- Page 4 – Installation Instructions; Pressure Relief Procedure; Start Up Instructions
- Page 5 – Technical Data
- Page 6 – Dimensions
- Page 7 – Notes
- Page 8 – Graco Standard Warranty; Graco Information
Instructions
Air Over Oil
Manifold Assembly
313848C
- Uses one-way air injectors to inject air into individual valve lube outlet ports -
Model No.: 24B237 (3 sections), 24B239 (4 sections), 24B240 (5 sections),
24B241 (6 sections)
Models without Air Sensor: 24J814 (3 sections), 24J815 (4 sections), 24J816
(5 sections), 24J817 (6 sections)
Can be mounted to standard, Graco MSP Divider Valve. See instruction manual 312497.
250 psi (1.7 MPa, 17 bar) Maximum Air and Fluid Working Pressure
US Patent Pending
Important Safety Instructions
Read all warnings and instructions in this manual.
Save these instructions.
Model 24B237 shown attached to MSP Divider Valve
ENG
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Warnings 2 313848C Warnings The following warnings are for the setup, use, grounding, maintenance, and repair of this equipment. The exclama-tion point symbol aler ts you to a general warning and the hazard symbol refers to procedure-specific risk. Refer back to these warnings. Additional, product-s...
Assembly Instructions 313848C 3 Assembly Instructions Refer to F IG . 1 and F IG . 2. Key A Valve mounting screw access port B Plug 1/8 NPSF (4 places) (Part No. 557776) C Injector kit (Part No. 24B246) D 1/8 NPT E DIN 43650A Connector F Air Pressure Sensor (sold separately, Part No. 122375) G O-rin...
Installation Instructions 4 313848C Installation Instructions Pressure Relief Procedure Follow this pressure relief procedure whenever you are instructed to relieve pressure or need to check or ser-vice equipment. 1. Turn off power (air, electric, hydraulic) to lube supply pump. 2. Turn off air supp...
