Graco 224434 - Manual
Graco 224434 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Warning Symbol; Caution Symbol; CAUTION; WARNING; INJECTION HAZARD
- Page 3 – FIRE AND EXPLOSION HAZARD; EQUIPMENT MISUSE HAZARD
- Page 4 – Installation; Grounding; Flushing Safety
- Page 5 – Typical Installation
- Page 7 – Operation; Pressure Relief Procedure
- Page 8 – Flush the Pump Before Using; Starting and Adjusting the Pump; Shutdown and Care of the Pump
- Page 9 – Troubleshooting
- Page 10 – Service; Disconnecting the Displacement Pump
- Page 12 – Parts
- Page 13 – Notes
- Page 15 – Technical Data; Performance Chart
307013
Rev. V
First choice when
quality counts.
t
INSTRUCTIONS-PARTS LIST
INSTRUCTIONS
This manual contains important
warnings and information.
READ AND KEEP FOR REFERENCE.
45:1 Ratio King
r
Pump
4050 psi (28 MPa, 279 bar) Maximum Working Pressure
90 psi (0.6 MPa, 6.2 bar) Maximum Air Input Pressure
Model 224434, Series A
Stubby Size, with Standard Air Motor and
Severe-Duty Displacement Pump*, with leather packings
*Severe-Duty Displacement Pumps have an abrasion
and corrosion-resistant displacement rod and sleeve.
Refer to the Technical Data in the separate displace-
ment pump manual 307728 for Wetted Parts informa-
tion.
GRACO INC.
P.O. BOX 1441
MINNEAPOLIS, MN
55440–1441
E
COPYRIGHT 1997, GRACO INC.
Graco Inc. is registered to I.S. EN ISO 9001
03290
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 307013 Table of Contents Warnings 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installation 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Operation 7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Troubleshoo...
3 307013 WARNING FIRE AND EXPLOSION HAZARD Improper grounding, poor air ventilation, open flames, or sparks can cause a hazardous condition andresult in fire or explosion and serious injury. D Ground the equipment and the object being sprayed/dispensed. See Grounding on page 4. D Provide fresh air v...
4 307013 Installation Grounding WARNING FIRE AND EXPLOSION HAZARDBefore operating, ground the system asexplained below. Also read the sectionFIRE AND EXPLOSION HAZARD onpage 3. To reduce the risk of static sparking, ground the pumpand all other components used or located in the spray/dispensing area...
