Graco 222103-E - Manual - manualsarea.com

Page 2 - Warning Symbol; Caution Symbol; CAUTION; EQUIPMENT MISUSE HAZARD; WARNING

2 307906 Table of Contents Warnings 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installation 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Operation 8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Troubleshoo...

Page 4 - MOVING PARTS HAZARD; FIRE AND EXPLOSION HAZARD

4 307906 MOVING PARTS HAZARD Moving parts can pinch or amputate your fingers or other body parts. D Do not cycle the pump with any parts disassembled. D Keep clear of all moving parts when you start or operate the pump. D Before you service the equipment, follow the Pressure Relief Procedure on page...

Page 5 - Installation

5 307906 Installation F B C D E KEY A Air shutoff valve B Air filter C Air regulator and gauge D Air motor lubricator E Bleed-type master air valve (required, Part No. 110223) F Air and fluid hose kits G Ground wire (required, Part No. 222011) H Fluid shutoff valve Main Air Line Main Fluid Line A A ...

Page 6 - To ground the pump

6 307906 Installation Grounding Proper grounding is an essential part of maintaining a safe system. To reduce the risk of static sparking, ground the pump. Check your local electrical code for detailed grounding instructions for your area and type of equipment. Be sure to ground all of this equipmen...

Page 8 - Operation

8 307906 Operation Pressure Relief Procedure PRESSURIZED FLUID HAZARD This equipment stays pressurized until pressure is manually relieved. To reduce the risk of serious injury from moving parts, pressurized fluid, accidental spray from the valve, or splashing fluid, follow this procedure whenever y...

Page 9 - Troubleshooting

9 307906 Troubleshooting Problem Cause Solution Pump does not run. There is no fluid demand. In a closed-end system the pump runs only when there is demand for fluid. Air supply is insufficient. Check air supply. Increase air pressure or volume. Fluid outlet line or intake valve is clogged. Relieve ...

Page 10 - Service

10 307906 Service NOTE: Clean and inspect all parts for wear or damage when disassembled. Replace parts as needed. Repair Kit 247431 is available. For the best results, use all the parts in the kit. Parts included in the kit are marked with an asterisk in the text, figures, Parts Drawing , and Parts...

Page 12 - Parts List

12 307906 Parts List Model 222051, Series E Model 222103, Series E Model 222104, Series E Universal Pump 55-Gallon Drum Bung-Mount Pump 275-Gallon Tank Bung-Mount Pump Includes items 1 through 27 Includes items 1 through 26 Includes items 1 through 26, and 28 through 31, 28 through 30, and 32 Ref. N...

Page 14 - Dimensional Drawing; Technical Data

14 307906 Dimensional Drawing 15.7 in. (400 mm) 7.4 in. (187 mm) 36.6 in. (929 mm) Model 222103 1/4 npt(f) 3/4 npt(f) 1 1/2 npt(f) 05940B 46.6 in. (1183 mm) Model 222104 grounding screw extension tube stand-off Technical Data Maximum working pressure 180 psi . . . . . . . . . . . . . . . . . (1.2 MP...

Page 15 - Performance Curves

15 307906 Performance Curves 0 25 50 75 100 125 150 0 1 2 3 4 5 (3.8) (7.6) (11.4) (15.1) (18.9) FLUID FLOW-- --gpm (lpm) Test Fluid: No. 10 weight oil at 75 _ F (23.9 _ C) To find fluid outlet pressure at a specific fluid flow and operating air pressure:1. Locate desired fluid flow along bottom of ...

Page 16 - Graco Standard Warranty; Graco Information

16 307906 Graco Standard Warranty Graco warrants all equipment manufactured by Graco and bearing its name to be free from defects in material and workmanship on the date of sale to the original purchaser for use. With the exception of any special, extended, or limited warranty published by Graco, Gr...

Graco 222103-E - Manual

Table of Contents:

Summary

Other Graco Models