Graco 205148 - Manual
Graco 205148 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Warnings; WARNING
- Page 3 – Installation; Grounding
- Page 4 – Air and Transfer Lines (F; Install the Pump
- Page 5 – Operation; Pressure Relief Procedure; Startup; Clearing Obstructions
- Page 6 – Troubleshooting
- Page 7 – Repair; Throat Packing Repair (F
- Page 8 – Pump Intake Repair (F
- Page 9 – Parts
- Page 10 – Technical Data
- Page 11 – Notes
- Page 12 – Graco Warranty and Disclaimers; Warranty
Graco Inc. P.O. Box 1441 Minneapolis, MN 55440-1441
Copyright 1958, Graco Inc. is registered to I.S. EN ISO 9001
306642F
Instructions-Parts List
3:1 Ratio Bulldog
®
Transfer Pump
- For use in lubrication applications only -
Model: 205028
With inductor, guide bars and release bar
Model: 205148, Series E
Without inductor, guide bars and release bar
300 psi (2.1 MPa, 21 bar) Maximum Working Pressure
100 psi (0.7 MPa, 7 bar) Maximum Air Input Pressure
Important Safety Instructions
Read all warnings and instructions in this manual.
Save these instructions.
Use with lubrication applications only! This pump is
designed to be used for pumping non-corrosive and
non-abrasive lubricants and greases only. Any other use of
the pump can cause unsafe operating conditions and result
in component rupture, fire or explosion, which can cause
serious bodily injury.
Priming Piston Hazard
This pump has a priming piston which extends below the
foot valve during operation. This piston could pinch or
amputate your fingers or hands as it moves up, into the cyl-
inder. To reduce the risk of injury, keep your fingers and
hands and all tools away from the priming piston during
operation and whenever the air and fluid pressure in the
pump is not fully relieved.
ti10550a
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Warnings 2 306642F Warnings The following warnings are for the setup, use, grounding, maintenance, and repair of this equipment. The exclamation point sym-bol alerts you to a general warning and the hazard symbol refers to procedure-specific risk. Refer back to these warnings. Addi-tional, product-s...
Installation 306642F 3 Installation Grounding In a low pressure air spray system, static sparking is generally not a problem; however some simple precau-tions should be taken to reduce the risk. Check your local code for detailed grounding instructions for your area and type of equipment. Ground all...
Installation 4 306642F Air and Transfer Lines (F IG . 2) The typical installation shown in F IG . 2 is only provided as a guide for selecting and installing required and optional accessories. Be sure all air and fluid accessories are properly sized for your system and are compatible with the fluid y...
