Graco 2.40E+26 - Manual
Graco 2.40E+26 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Installation; Prepare the Site; Using the Pipe Port Inserts
- Page 3 – Refill Lubricator
- Page 4 – Operation; Pressure Relief Procedure; Adjusting the Air Regulator
- Page 5 – Repair; Air Regulator
- Page 6 – Repair Kits
- Page 7 – Parts
- Page 9 – Technical Data
- Page 10 – Graco Standard Warranty; Graco Information
3A0293C
ENG
Instructions-Parts
Air Controls
Air controls for light and heavy duty Xtreme Sprayer carts.
For professional use only.
24E025
Air Controls for Light Duty Xtreme Package Carts
24E013
Air Controls for Heavy Duty Xtreme Package Carts
100 psi (0.7 MPa, 7 bar) Maximum Working Pressure
Important Safety Instructions
Read all warnings and instructions in this manual
and the Xtreme Packages manual. Save these
instructions.
24E025
24E013
r_24e025_3A0293_1a
r_24e013_3A0293_1a
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Installation 2 3A0293C Installation Prepare the Site NOTE: Always use Genuine Graco Parts and Acces-sories, available from your Graco distributor. If you supply your own accessories, be sure they are ade-quately sized and pressure rated for your system. Bring a compressed air supply line from the ai...
Installation 3A0293C 3 Adding a Lubricator (Accessory) To add an accessory air line lubricator to the kit, you must order Part No. 244841 Lubricator Accessory Kit. 1. Remove filter/regulator from mount bracket. 2. Remove the pin (B) from the outlet of the filter/regu-lator. F IG . 2. 3. Remove regul...
Operation 4 3A0293C Operation Pressure Relief Procedure 1. Lock the gun trigger safety. 2. Close all bleed-type master air valves, including the bleed-type master air valve (3), supplied in your sys-tem. F IG . 2. 3. Turn the regulator T-handle all the way counterclock-wise if you are removing the a...
