Page 2 - Contents
Contents 2 334641L Contents Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Component Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Grounding . . . ...
Page 3 - Warnings; GROUNDING
Warnings 334641L 3 Warnings The following warnings are for the setup, use, grounding, maintenance, and repair of this equipment. The exclamation point symbol alerts you to a general warning and the hazard symbols refer to procedure-specific risks. When these symbols appear in the body of this manual...
Page 4 - FIRE AND EXPLOSION HAZARD
Warnings 4 334641L FIRE AND EXPLOSION HAZARD Flammable fumes, such as solvent and paint fumes, in work area can ignite or explode. To help prevent fire and explosion: • Do not spray flammable or combustible materials near an open flame or sources of ignition such as cigarettes, motors, and electrica...
Page 5 - SKIN INJECTION HAZARD; EQUIPMENT MISUSE HAZARD
Warnings 334641L 5 SKIN INJECTION HAZARD High-pressure spray is able to inject toxins into the body and cause serious bodily injury. In the event that injection occurs, get immediate surgical treatment. • Do not aim the gun at, or spray any person or animal. • Keep hands and other body parts away fr...
Page 6 - ELECTRIC SHOCK HAZARD; TOXIC FLUID OR FUMES HAZARD
Warnings 6 334641L ELECTRIC SHOCK HAZARD This equipment must be grounded. Improper grounding, setup, or usage of the system can cause electric shock. • Turn off and disconnect power cord before servicing equipment. • Connect only to grounded electrical outlets. • Use only 3-wire extension cords. • E...
Page 7 - Component Identification
Component Identification 334641L 7 Component Identification A ON/OFF Switch B Pressure Control D Prime Valve F Tip Guard G Spray Tip H Gun J Airless Hose K Power Cord L Trigger Lock M Drain Tube N Suction Tube P Pump R Fluid Outlet S Hanger T Filter U Finger Guard / TSL Fill Point V Pail Hook W Blue...
Page 8 - Grounding; Power Requirements
Grounding 8 334641L Grounding This sprayer is equipped with a power cord that has a ground wire and an appropriate grounding plug. The plug must be plugged into an outlet that is properly installed and grounded in accordance with all local codes and ordinances. Do not modify the plug provided; if it...
Page 10 - Trigger Lock; Setup
Setup 10 334641L 7. If you suspect the spray tip or hose is clogged or that pressure has not been fully relieved:a. VERY SLOWLY loosen the tip guard retaining nut or the hose end coupling to relieve pressure gradually. b. Loosen the nut or coupling completely. c. Clear hose or tip obstruction. Trigg...
Page 13 - Startup
Startup 334641L 13 Startup 1. Perform Pressure Relief Procedure , page 9. 2. Turn pressure control to lowest pressure. 3. Turn ON/OFF switch to ON position. 4. Place fluid intake in paint pail. Place drain tube in waste pail. 5. Turn pressure control to Fast Flush to start motor. Allow paint to circ...
Page 15 - Operation; Spray Tip Installation; Pressure Relief; Spray
Operation 334641L 15 Operation Spray Tip Installation 1. Perform Pressure Relief Procedure , page 9. 2. Use spray tip (A) to insert OneSeal ™ (B) into tip guard (C). 3. Insert Spray Tip. 4. Screw assembly onto gun. Tighten. Spray When a RAC X™ FF LP Fine Finish Low Pressure reversible spray tip is u...
Page 16 - Clear Spray Tip Clog
Operation 16 334641L 1. Spray test pattern. Adjust pressure to eliminate heavy edges. 2. Use smaller tip size if pressure adjustment cannot eliminate heavy edges. 3. Hold gun perpendicular, 10-12 in. (25-30 cm) from surface. Spray back and forth; overlap by 50%. 4. Trigger gun after moving. Release ...
Page 17 - Digital Display; Pressure Display; Stored Data Display
Operation 334641L 17 Digital Display (if applicable) Most models are equipped with a digital display. This section explains how to use this feature. Pressure Display 1. Perform Pressure Relief Procedure , page 9. 2. Plug sprayer into grounded outlet. Turn ON/OFF switch to ON position. 3. The pressur...
Page 19 - Cleanup; Fast Flush Drain Tube
Operation 334641L 19 Cleanup 1. Perform Pressure Relief Procedure , page 9. 2. Remove Tip Guard and Spray Tip. For additional information, see separate gun manual. Fast Flush Drain Tube 3. Remove fluid intake and drain tube from paint, wipe excess paint off outside. 4. Place fluid intake in flushing...
Page 21 - BlueLinkTM App; Enabling or Disabling
BlueLink™ App (if applicable) 334641L 21 BlueLink™ App (if applicable) Download the Graco BlueLink app from the Apple App Store or Google Play to connect to the paint sprayer via Bluetooth ® . The BlueLink app allows you to access sprayer information, settings, statistics, and provides access to use...
Page 22 - Maintenance; Recycling and Disposal at; Dismantle and recycle:
Maintenance 22 334641L Maintenance Routine maintenance is important to ensure proper operation of your sprayer. Maintenance includes performing routine actions which keep your sprayer in operation and prevents trouble in the future. Perform Pressure Relief Procedure , page 9, before performing maint...
Page 23 - Troubleshooting; Mechanical/Fluid Flow
Troubleshooting 334641L 23 Troubleshooting Mechanical/Fluid Flow 1. Follow Pressure Relief Procedure , page 9, before checking or repairing. 2. Check all possible problems and causes before disassembling the unit. Problem What to Check If check is OK, go to next check What to Do When check is not OK...
Page 26 - Electrical; Error Code Messages
Troubleshooting 26 334641L Electrical Symptom: Sprayer does not run, stops running, or will not shut off. 1. Perform Pressure Relief Procedure , page 9. 2. Plug sprayer into correct voltage, grounded outlet. 3. Turn the ON/OFF switch OFF wait 30 seconds and then turn power back ON again (this ensure...
Page 31 - Sprayer Will Not Run
Troubleshooting 334641L 31 Electrical cont... Sprayer Will Not Run (See following page for steps) Remove Control box cover. Turn sprayer ON. Observe control board status light oncontrol board (see page 27). No Light Once Light oncontinuously Flashing Normal Operation Control boardCommanding motorto ...
Page 33 - Sprayer Will Not Shut Off; Troubleshooting Procedure
Troubleshooting 334641L 33 Electrical cont... Sprayer Will Not Shut Off 1. Perform Pressure Relief Procedure , page 9. Leave prime valve open (down) and turn ON/OFF switch OFF . 2. Remove control box cover so the control board status light can be viewed if available. Troubleshooting Procedure Plumb ...
Page 34 - Sprayer Parts
Sprayer Parts 34 334641L Sprayer Parts 54 54a 54b 23 63 65 12 74 59 115 114 116 47 75 81 82 83 67 ti35154c 53 1 2 3 See page 37 Ref. Torque 140-160 in-lb (15.8 - 18.1 N•m)30-35 in-lb (3.4 - 4.0 N•m)Hammer tight25-30 ft-lb (33.9 - 40.7 N•m) 1 2 3 4
Page 36 - Sprayer Parts List; Part
Sprayer Parts 36 334641L Sprayer Parts List Ref. Part Description Qty. 12 117501 SCREW, mach, hex washer hd 4 13 115099 WASHER, hose 1 14 103413 O-ring 2 22 17C541 COVER, front, painted 1 23 287900 SHIELD, motor, painted includes 12 1 25 180131 BEARING, thrust 1 26 107434 BEARING, thrust 1 27 116073...
Page 40 - Control Box Parts List
Control Box - 17C325, 25R757 40 334641L Control Box Parts List Ref. Part Description Qty. 2 117828 PACKING, o-ring 1 3 111457 PACKING, o-ring 1 4 111600 PIN, grooved 1 5 277364 GASKET, seat, valve 1 6 120405 SCREW, mach, Phillips, pan hd 5 7 115498 SCREW, slot, hex, wash hd 1 11 116167 KNOB, potenti...
Page 41 - Wiring Diagram
Page 42 - Technical Specifications
Technical Specifications 42 334641L Technical Specifications 17E851, 17C325 and 25R757 US Metric SprayerMaximum fluid working pressure 3300 psi 228 bar, 22.8 MPa Maximum Delivery 0.54 gpm 2.0 lpm Maximum Tip Size 0.023 0.023 Fluid Outlet npsm 1/4 in. 1/4 in. Cycles 620 per gallon 164 per liter Gener...
Page 43 - California Proposition 65; CALIFORNIA RESIDENTS; Cancer and reproductive harm –
Technical Specifications 334641L 43 California Proposition 65 Transmitter Frequency (all models): 2.4GHz Transmitter Power (all models): +8dBm NOTE: FCC/IC Notice (all models) Contains FCC ID: QOQBGM13P Contains IC: 5123A-BGM13PThe enclosed device complies with Part 15 of the FCC Rules and with Indu...
Page 44 - Graco Standard Warranty; Graco Information
All written and visual data contained in this document reflects the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice. Original instructions. This manual contains English. MM 334641 Graco Headquarters: Minneapolis Int...
