Giant P425 - Manual
Giant P425 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – INSTALLATION INSTRUCTIONS; IMPORTANT OPERATING CONDITIONS
- Page 3 – We recommend a 1.15 service factor; Specifications; P420 HORSEPOWER REQUIREMENTS
- Page 4 – P422 HORSEPOWER REQUIREMENTS
- Page 5 – P423HORSEPOWER REQUIREMENTS
- Page 7 – Plunger Packing Kits
- Page 8 – P425 HORSEPOWER REQUIREMENTS
- Page 10 – Position; Screw with Washer
- Page 11 – PUMP SYSTEM MALFUNCTION; Oil Leaks; Recommended Spare Parts
- Page 12 – GIANT INDUSTRIES LIMITED WARRANTY
P400 Series -
22 and 25mm Versions
Contents:
Installation Instructions:
page 2
Pump Specifications (except P425):
pages 3-5
Exploded View:
page 6
Parts List/Kits:
page 7
Pump Specifications (P425):
page 8
Repair Instructions/Torque Specs.:
pages 9-10
Trouble Shooting Chart:
page 11
Recommended Spare Parts List:
page 11
Dimensions:
back page
Warranty Information:
back page
Updated 11/07
Triplex Ceramic
Plunger Pump
Operating Instructions/
Repair and Service Manual
For Models:
P420
P420-0011
P420-0021
P422
P423
P425
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 INSTALLATION INSTRUCTIONS 4. Use of a dampener is necessary to minimizepulsation at drive elements, plumbing, connections,and other system areas. The use of a dampener withGiant Industries, Inc. pumps is optional, althoughrecommended by Giant Industries, Inc. to furtherreduce system pulsation. Dam...
3 NOTES: In order to drive the pump from the side opposite the present shaftextension, simply remove the valve casing from the crankcase androtate the pumps 180 degrees to the desired position. Be certain torotate the seal case (item #20) as well, so that the weep holes aredown at the six o'clock po...
4 Consult the factory for special requirements that must be met if the pump isto operate beyond one or more of the limits specified above. NOTES: In order to drive the pump from the side opposite the present shaftextension, simply remove the valve casing from the crankcase androtate the pumps 180 de...
